Model: 42mm x 42mm ( Bottom Length x Width) stepper motor
Number of phases: 2 phases
Step angle: 1.8°
Rated voltage: DC 9 Volts - 24 Volts
Rated current: 1.5 Amps
Shaft diameter: 5mm
Phase resistance: 3.6Ω±10
Phase inductance: 3.5mH±20%
Holding torque: 0.1 N.m min
Starting speed: 500RPM
Running speed: 700RPM
Insulation resistance: 100mΩ minute
Size and Weight: The NEMA 17 stepper motor measures 1.7 x 1.7
inches (42x42 millimeters) and is lightweight, making it easy to
install and integrate into various devices.
Torque and Speed: It provides high torque output, suitable for
applications that require precise control. The step angle is 1.8
degrees, meaning the motor covers an angle of 1.8 degrees per step.
Application Fields: Widely used in automation equipment, robots,
CNC machine tools, 3D printers, and other fields that require
precise position control.
Drivers and Controllers: Can be used in conjunction with a variety
of stepper drivers to achieve efficient and stable motion control.
RH<=90%(40c) Grade 4 anti-lighting protection
1. Motor structure and performance: 42 stepper two-phase miniature
motors have a 2-phase structure with a step angle of 1.8°, and
smaller step angles can be achieved through subdivision control,
which is suitable for high-precision positioning and control needs
of the scene.
2. High reliability design: These motors have been optimised by
computer, with high operating efficiency and low temperature rise
of the electromagnetic system, adopting insulating materials, as
well as using low-loss silicon steel sheets and precision one-piece
stamping technology, with high precision and low loss.
3. Convenient installation: Equipped with internal thread mounting
standard, the thread is not easy to be damaged, and the output
shaft bearing embedded design cancels the gearbox cam, which can be
directly attached to the mounting surface, simplifying the
installation process.
4. Low noise and smooth operation: The motor shows low noise level
during operation, suitable for application environments with high
requirements for silence, such as 3D printers and engraving
machines.
5. Wide range of use: Suitable for 3D printers, automatic screw
machines, office copies, medical equipment, robots, CNC machine
tools, workshop equipment, etc.
The motor is supplied with a 1 metre long power cable with a 4-pin
connector already assemblied, ready to plug and print
Package includes:
Driver TB6600 x 1
Stepper Motor x 1
100cm Cable x 1
