Galaxy Flatbed Eco Solvent Film Printing Machine Multifunction UD -
1812 LC
Printer Details
1 . functiion for printing on ceiling film
2 . Can print both roll to roll printing media and work with
flatbed ,print directly on PS and KT board
3 . Work with one or two DX5 head
4 . 1440dpi High resolution, CMYK 4 color printing
5 . Suitable for both indoor and outdoor printing
Spetification
| Model | UD-1812LC |
| Printhead | Epson DX5 |
| Number of printhead | 2 Heads |
| Maximum print width | 1800mm |
| Print Speed (m2/h) | Print mode | Standard output(m2/h) |
| RQ | 2 PASS 55 |
| D | 3 PASS 38 |
| S | 4 PASS 28 |
| Q | 6 PASS 19 |
| HQ | 8 PASS 14 |
| BL | 12 PASS 9 |
| Ink | Type: | Water based / Eco Solvent Ink |
| Color : | 4 Color (C,M,Y,K) |
| Capacity: | 1L per Main Tank of Each Color |
| Ink Supply System | Auto Ink Supply System |
| Media Width | Maximum 1,880mm |
| Model | UD-1812LC |
| Media Type | Vinyl, Polyester, Flex, Back-lit Film, PS Board, KT Board, PVC
Board, etc. |
| Auto Media Feeding System | Equipped (Max. Media Weight 25kg) |
| Auto Cleaning System | Anti-clogged Flash Function & Capping System |
| Pre-heating & Drying System | Equipped |
| Clamp | Equipped |
| Print Interface | USB 2.0 |
| Printhead Height | 2 to 10 mm from Media |
| RIP Software | Ultraprint, Maintop, Photoprint, Wasatch, Ergosoft |
| Input Power | AC 220V, 50Hz/60Hz |
| Machine Dimension / N.W | L3,080 x W990 x H1,260mm / 204KG |
| Package Dimension / G.W |
Advantage
inkjet printer Inkjet half suddenly do not spray the inkjet printer
more common problems, problems that may arise Photo Board, and
replace. Another possibility is the problem of printing line,
Phantom inkjet printer is not recommended the inferior-line, use
good original line, the line can not be more than 3 m. There is
also a problem that may arise is the question of the computer, this
time you need to redo the system, or replace the computer can
solve.
Piezoelectric inkjet printer, good operating habits can directly
determine the inkjet printer life.
Daily, weekly, each boot as long as a little more carefully, to
develop good habits, before each boot. Processing of the track
(light bars), first in the tissues on a few drops of alcohol, wipe
light bars to get rid of dust and dirty dirt, and then repeatedly
wipe tissues on a few drops of oil (sewing machine oil) available
several times to ensure that the light bar lubrication. This
reduces the resistance to ensure that the servo motor life. Daily.
Regardless of whether you spray painting should be with a tissue
dipped nozzle, if it is to be in better ventilation or high ambient
drying temperature dipped more times. So that the plug to ensure
the smooth flow of ink.
Weekly. To clean up the grating, with a tissue to wipe the upper
and lower sides of the grating, ink or other dirt can be used
facial tissue dampened with water to wipe, be careful not to scrape
the grating. Figure piezoelectric inkjet printer in this crown to
remind some manufacturers allow customers to paper dipped in
rubbing alcohol, but alcohol could corrode, things in general and
water and can be erased.
Printer Photo
