Multifunctional Manual Metallographic Sample Cutting
Equipment Max Section Diameter 65mm
Brief Introduction:
iqualitrol iCut-404 multi-functional cutting machine mainly used to
cut cylinder and anomalistic shape samples, such as multi-angular
shape, protruding board, etc.
iqualitrol iCut-404 adopts the all-sealing structure and quick
clamping mechanism, and also attaching the special purpose cooling
water tank for the use of coolant circulation, prolonging the
service life, perfecting and facilitate the operation.
The inner and outer covering shell, tongs mouth, operating board,
and other main spares are all made of stainless steel material,
which is the optimum equipment of cutting samples.
In order to avoid damage of sample metallographical structure
during cutting, strong cooling system comes with the cutter, and
can increase the cutting cross section, raising the availability of
cutting emery wheel.
The cutter has the advantages of easy to operate, use, maintain,
etc, which is an excellent equipment of cutting anomalistic shapes.
Technical Specification:
| Cutting Section | 65 x 65mm |
| Rotation Speed | 2800rpm |
| Cutting Wheel | 250 x 1.5 x 32mm |
| Motor | 1.1KW, AC380V/50Hz/3Ph |
| Dimension | 870 x 590 x 1110mm |
| Net Weight | 350Kg |
Specimen Cutter:
When cutting a specimen from a larger piece of material, care must
be taken to ensure that it is representative of the features found
in the larger sample, or that it contains all the information
required to investigate a feature of interest.
One problem is that preparation of the specimen may change the
microstructure of the material, for example through heating,
chemical attack, or mechanical damage. The amount of damage depends
on the method by which the specimen is cut and the material itself.
Cutting with abrasives may cause a high amount of damage, while the
use of a low-speed diamond saw can lessen the problems. There are
many different cutting methods, although some are used only for
specific specimen types. iqualitrol provides the iCut-864 low speed
diamond saw for cutting OM (optical microscope), SEM (scanning
electron microscope), and even TEM (transmission electron
microscope) specimen.
