Coupler Line Temperature Rise Test Equipment With Three Core Rubber
Insulated Cord
Scope of application: in line with IEC60320-1998.18 and
GB17465-1998.18 and the national
standard of the technical standards for the design, for thermal
conditions and thermal conditions
under the heat of the appliance coupler test.
That is to say, appliance couplers for use in hot and hot
conditions shall be capable of
withstanding the heat generated by the apparatus or equipment to
which they are connected or
for the construction of connectors for thermal and thermal
conditions, Insulation will not overheat.
Test purpose: The rewirable connector shall be fitted with a
three-core rubber insulated cord with
a cross-sectional area of 1.5 mm2. The non-rewirable connector
shall be tested at the time of
delivery. The connector was inserted into the appliance input
socket of the test device for 4 days
(96 hours).
The temperature of the pin base is maintained at 120 ° C ± 2 ° C
for the entire duration of the
test, for use in connectors under thermal conditions; 155 ° C ± 2 °
C for connectors under extreme
heat conditions. 2) Working current: 10A; 3) Test temperature
range: 0 ~ 199 ℃; 4) Temperature
meter accuracy: ± 2% ± 2d; 5) Time (1) Input voltage: AC: 220V ±
10% / 50Hz; Timer: 0.01S ~
99H99min; 6) equipped with high-precision K-type thermocouple.
