16W UV Water Sterilizer For RO System Stainless Steel Led UV Light
Sterilizer
1. Description: 16W UV Water Sterilizer For RO System Stainless Steel Led UV Light
Sterilizer
2. Specifications:
| Power | 16W |
| Flow | 2L/min |
| Length | 255mm |
| Interface Diameter | 25mm |
| Inlet and outlet | 1/4'' |
| Shell Material | Stainless 304# |
3. Product Description
The use of ultraviolet light to kill bacteria, viruses, yeast, mold
and algae in the water, without adding any chemicals and without
heating or cooling, Drinking water, drinking pure water, mineral
water, mountain spring water, washing water system for water
sterilization, to the authorities groups, senior hotels, public
places, such as water supply systems, water supply systems, Is also
the ideal sanitation and epidemic prevention disinfection
equipment.
4.Equipment structure
1). UV lamp
2). Quartz glass casing
3). Ballast power supply
4).304 stainless steel body
5.Features
1). Can quickly and effectively kill a variety of bacteria, viruses
and other microorganisms;
2). By photolysis, can effectively degrade the chloride in water;
3). Simple operation, easy maintenance;
4). Covers an area of small, large amount of water treatment;
5). No pollution, environmental protection and strong, will not
produce toxic side effects;
6). Low investment costs, low operating costs, easy installation of
equipment;
7). The use of optical design of the unique inner wall treatment
process, so that the cavity to maximize the use of ultraviolet
light, so that sterilization effect multiplied.
6.Precautions and instructions for use
1). Ultraviolet radiation can not be directly to the body's skin;
2). Ultraviolet radiation on the working environment temperature
and humidity have certain requirements: more than 20 ℃, the
radiation intensity is more stable; between 5 ~ 20 ℃, with the
temperature rise in the intensity of radiation; relative humidity
below 60%, sterilization ability , The humidity increased to 70%,
the sensitivity of microorganisms to reduce the UV, humidity
increased to 90%, the bactericidal decline of 30% to 40%.
3). When the water is disinfected, the water layer thickness should
be less than 2cm, the water flow out of time to accept 90000 UW.S /
cm2 or more radiation dose to achieve effective disinfection of
water.
4). UV lamp and casing surface dust and oil, it will hinder the
ultraviolet light through, which should often (usually once a week)
to alcohol, acetone, ammonia wipe.
5). Lamp start, heating to a steady state takes a few minutes, the
higher terminal voltage. Close immediately if re-opened, often more
difficult to start, and easy to damage the lamp and reduce lamp
life, it is generally not appropriate to start.
7.Scope of application:
This series of products is a simple UV sterilizer for small
drinking fountains, Ro pure water system, direct drinking water
system water disinfection, mainly used in household drinking water,
small water plants, small mineral water plants, drinking fountains
and so on. The machine is small and lightweight, easy to install
and convenient, high sterilization rate (99.9%) and other
characteristics.
8. Show
