|
| Q00JCPU | Program step: 8k steps CPU integrated with power supply and base |
| Q00CPU | Program step: 8k steps |
| Q01CPU | Program step: 14k steps |
| Q02CPU | Program step: 28k steps |
| Q02HCPU | Program step: 28k steps |
| Q06HCPU | Program step: 60k steps |
| Q12HCPU | Program step: 124k steps |
| Q25HCPU | Program step: 252k steps |
| Q12PHCPU | Program step: 124k steps |
| Q25PHCPU | Program step: 252k steps |
| Q172CPU | For 8-axis control |
| Q173CPU | For 32-axis control |
| Q6BAT | Replacement battery for Q02/Q02H/Q06H/Q12H/Q25HCPU |
| Extension cable |
| QC05B | 0.45m (1.48feet) |
| QC06B | 0.6m (1.96feet) |
| QC12B | 1.2m (3.93feet) |
| QC30B | 3m (9.84feet) |
| QC50B | 5m (16.4feet) |
| QC100B | 10m (32.8feet) |
| Input module |
| QX10 | 100-120VAC/7 to 8mA, 16 points, response time: 20ms, terminal block |
| QX28 | 240VAC, 8 points, terminal block |
| QX40 | 24VDC/4mA, positive common, 16 points, response time:
1/5/10/20/70ms, terminal block |
| QX40-S1 | 24VDC positive common, 16 points, terminal block, for high-speed
input (response time of 0.1/0.2/0.4/0.6/1ms) |
| QX41 | 24VDC/4mA, positive common, 32 points, response time:
1/5/10/20/70ms, connector (Note 3) |
| QX42 | 24VDC/4mA, positive common, 64 points, response time:
1/5/10/20/70ms, connector (Note 3) |
| QX70 | 5-12VDC input shared between positive common and negative common,
16-point terminal block |
| QX71 | 5-12VDC input shared between positive common and negative common,
32-point connector (Note 3) |
| QX72 | 5-12VDC input shared between positive common and negative common,
64-point connector (Note 3) |
| QX80 | 24VDC/4mA, negative common, 16 points, response time:
1/5/10/20/0ms, terminal block |
| QX81 | 24VDC/4mA, negative common, 32 points, response time:
1/5/10/20/0ms, connector (Note 4) |
| Output module |
| QY10 | 240VAC/24VDC, 2A/point 8A/common, 16 points (16 points/common),
output delay: 12ms, without fuse, terminal block |
| QY18A | 240VAC/24VDC, 2A/point 8 independent contact output points, block,
without fuse. |
| QY22 | 240VAC/0.6A, 16 points, terminal block, without fuse |
| QY40P | 12/24VDC 0.1A/point, 1.6A/common, 16 points (16 points/common),
output delay: 1ms, terminal block, with short-circuit protection
function |
| QY41P | 12/24VDC 0.1A/point, 2A/common, 32 points (32 points/common),
output delay: 1ms, connector, with short-circuit protection
function (Note 3) |
| QY42P | 12/24VDC 0.1A/point, 2A/common, 64 points (32 points/common),
output delay: 1ms, connector, with short-circuit protection
function (Note 3) |
| QY50 | 12/24VDC 0.5A/point, 4A/common, 16 points (16 points/common),
output delay: 1ms, with fuse, terminal block |
| QY68A | 5-24VDC, 2A/point, 8A/module, 8 points, all points independent,
sink/source, terminal block, without fuse |
| QY70 | 5/12VDC, 16mA/point, 16 points (16 points/common), output delay:
0.3ms, with fuse, terminal block |
| QY71 | 5/12VDC, 16mA/point, 32 points (32 points/common), output delay:
0.3ms, with fuse, connector (Note 3) |
| QY80 | 12/24VDC 0.5A/point, 4A/common, 16 points (16 points/common),
output delay: 1ms, with fuse, terminal block |
| QY81P | 12/24VDC 0.1A/point, 2A/common, 32 points (32 points/common),
output delay: 1ms, connector, with short-circuit protection
function (Note 4) |
| Analog module |
| Q64AD | 4 channels, analog-to-digital conversion: voltage/current input |
| Q68ADV | 8 channels, analog-to-digital conversion: voltage input |
| Q68ADI | 8 channels, analog-to-digital conversion: voltage input |
| Q62DA | 2 channels, digital-to-analog conversion: voltage/current output |
| Q64DA | 4 channels, digital-to-analog conversion: voltage/current output |
| Q68DAV | 8 channels, digital-to-analog conversion: voltage output |
| Q68DAI | 8 channels, digital-to-analog conversion: current output |
| I/O composite |
| QH42P | 24VDC positive common input: 32 points (response time:
1/5/10/20/70ms) |
| 12-24VDC, 0.1A sink output: 32 points, connector, with
short-circuit protection function (note3) |
| QX48Y57 | 24VDC positive common input: 8 points |
| 12-24VDC/0.5A sink output: 7 points, with fuse, terminal blo |
| Power supply module |
| Q00JCPU(Power supply section) | 100-240VAC input/5VDC 3A output (consisting of CPU, power supply
and base) |
| Q61P-A1 | 100-120VAC input/5VDC 6A output |
| Q61P-A2 | 200-240VAC input/5VDC 6A output |
| Q62P | 100-240VAC input/5VDC 3A, 24VDC 0.6A output |
| Q63P | 24VDC input/5VDC 6A output |
| Q64P | 100-120/200-240VAC input/5VDC 8.5A output |
| I/O module connector |
| A6CON1 | Soldering 32-point connector (for QX41/42, QX71/72, QY41P/42P,QY71,
QH42P) |
| A6CON2 | Solderless terminal connection 32-point connector (for QX41/42,
QX71/72, QY41P/42P, QY71, QH42P) |
| A6CON3 | Flat cable pressure-displacement 32-point connector (for QX41/42,
QX71/72, QY41P/42P, QY71, QH42P) |
| A6CON1E | Soldering 32-point connector (for QX81, QY81P) |
| A6CON2E | Crimp-contact connection 32-point connector (for QX81, QY81P) |
| A6CON3E | Flat cable pressure-displacement 32-point connector (for QX81,
QY81P) |
| Temperature inputmodule |
| Q64RD | channels, platinum temperature measuring resistor input (3/4-wire
type) |
| Temperature control module |
| Q64TCTT | Thermocouple input-transistor output |
| Q64TCTTBW | Thermocouple input-transistor output with wire breakage detection
function |
| Q64TCRT | Platinum resistance thermometer input-transistor output |
| Q64TCRTBW | Platinum resistance thermometer input-transistor output with wire
breakage detection f |
| Channel-isolated pulse input module |
| QD60P8-G | 8 channels, 5/12 to 24VDC input, input filter setting, with
pre-scale function |
| High-speed counter | |
| QD62 | 2 channels, 200kpps, 5/12/24VDC input, sink transistor output (Note
2) |
| QD62D | 2 channels, 500kpps, differential input, sink transistor output
(Note 2) |
| QD62E | 2 channels, 200kpps, 5/12/24VDC input, source transistor output
(Note 2) |
| Positioning module |
| QD75P1 | 1-axis, open collector output (Note 2) |
| QD75P2 | 2-axis, open collector output (Note 2) |
| QD75P4 | 4-axis, open collector output (Note 2) |
| QD75D1 | 1-axis, differential output (Note 2) |
| QD75D2 | 2-axis, differential output (Note 2) |
| QD75D4 | 4-axis, differential output (Note 2) |
| QD70P4 | 4-axis, pulse output (Note 2) |
| QD70P8 | 8-axis, pulse output (Note 2) |
| Ethernet module |
| QJ71E71 | For 10BASE-5/10BASE-T |
| QJ71E71-B2 | For 10BASE-2 |
| QJ71E71-100 | For 10BASE-T/100BASE-TX |
| MELSECNET/H module |
| QJ71LP21-25 | SI/QSI optical cable, duplex loop, for control, ordinary or master
station |
| QJ71LP21G | GI optical cable, duplex loop, for control, ordinary or master
station |
| QJ72LP25-25 | SI/QSI optical cable, duplex loop, for remote I/O station |
| QJ72LP25G | GI optical cable, duplex loop, for remote I/O station |
| QJ71BR11 | Coaxial 75Ω cable, simplex bus |
| QJ72BR15 | Coaxial 75Ω cable, simplex bus for remote I/O station |
| Q80BD-J71LP21-25 | MELSECNET/H board for personal computer, optical cable
specifications, for control or ordinary station |
| Q80BD-J71LP21G | MELSEC/H board for personal computer, SI/QSI/H-PC optical cable
specifications, for control or ordinary station |
| Q80BD-J71BR11 | MELSECNET/H board for personal computer, coaxial cable
specifications, for control or ordinary station |
| CC-Link module |
| QJ61BT11 | For master/local |
| Serial communication modul |
| QJ71C24 | RS-232 1 channel, RS-422/485 1 channel |
| QJ71C24-R2 | RS-232 2 channels |
| Modem interface module |
| QJ71CMO | Built-in modem 1 channel/RS-232 1 channel |
| Intelligent communication module |
| QD51 | RS232 2 channels |
| QD51-R24 | RS232 1 channel, RS422/485 1 channel |
| SW1IDV-AD51HP | QD51 software package (shared between DOS/V personal computer and
AD51H-S3/A1SD51S) |
| SW1NX-AD51HP | QD51 software package (shared between NEC PC9800 series personal
computer and AD51H-S3/A1SD51S) |
| AS-i master unit |
| QJ71AS92 | Master module : complies with AS-i standard Ver.2.11. |
| Extension base unit |
| QA1S65B | Power supply + 5 I/O slots for AnS series modules |
| QA1S68B | Power supply + 8 I/O slots for AnS series modules |
| QA65B | Power supply + 5 I/O slots for large A series modules
(high-performance model only) |
| IC memory card |
| Q2MEM-1MBS | SRAM card: 1M bytes |
| Q2MEM-2MBS | SRAM card: 2M bytes |
| Q2MEM-2MBF | Flash card: 2M bytes (Flash ROM) |
| Q2MEM-4MBF | Flash card: 4M bytes (Flash ROM) |
| Q2MEM-8MBA | ATA card: 8M bytes (ATA flash ROM) |
| Q2MEM-16MBA | ATA card: 16M bytes (ATA flash ROM) |
| Q2MEM-32MBA | ATA card: 32M bytes (ATA flash ROM) |
| Q2MEM-BAT | Replacement battery for Q2MEM-1MBS |
| Base unit |
| Q33B | Power supply + CPU + 3 I/O slots for Q series modules |
| Q35B | Power supply + CPU + 5 I/O slots for Q series modules |
| Q38B | Power supply + CPU + 8 I/O slots for Q series modules |
| Q312B | Power supply + CPU + 12 I/O slots for Q series modules |
| Q63B | Power supply + 3 I/O slots for Q series modules |
| Q65B | Power supply + 5 I/O slots for Q series modules |
| Q68B | Power supply + 8 I/O slots for Q series modules |
| Q612B | Power supply + 12 I/O slots for Q series modules |
| Q52B | 2 I/O slots for Q series modules (power supply module unnecessary) |
| Q55B | 5 I/O slots for Q series modules (power supply module unnecessary) |
| DIN rail |
| Q6DIN1 | DIN rail mounting adaptor for Q38B/Q312B/Q68B/Q612B |
| Q6DIN2 | DIN rail mounting adaptor for Q35B/Q65B |
| Q6DIN3 | DIN rail mounting adaptor for Q33B/Q63B |
