Series Armature Plunger K0850 Φ11.3 SCG353A043 SCG353A044 Pulse
Valves
Series Armature Plunger K0850 Φ11.3 includes O-ring, armature
assembly, armature spring, ferrule.
The product is developed to be used in ambients with temperature
range from –10°C to +80°C
The armature assembly is designed for more than 50x106 cycles.
Specifications:
Plunger and core are made by a magnetic stainless steel specially
designed for solenoid applications.
The plunger is normally equipped with NBR rubber seals. Other
materials like FKM are available upon request. The armature
assembly is designed for more than 50x106 cycles.
The guide tube is made with brass (stainless steel is possible upon
special agreement).
1 . The pulse diaphragm valves are especially designed for dust
collector service applications, combining high flow, long life and
extremely fast opening and closing to produce reliable and
economical operation.
2 . The high flow, angle type bodies in combination with the
special main diaphragm assemblies give the unique operating
features required for dust collector service applications
3 . The design with integral compression fittings will facilitate
installation because there is no need for threaded piping
4 . The high quality diaphragms are reinforced and wear resistant
to guarantee a long operating life, even under harsh conditions
5 . Integral pilot operated valves satisfy all relevant EC
directives
General Data:
Ambient temperature ············································· -
10 °C to + 80 °C
Quality of medium according to ISO 8573-1 ·········· compressed air
class 4, 3, 4
Mounting position
·················································· any ( preferably
plunger in vertical direction )
Technical Data:
GENERAL
Differential pressure 0,35 - 8,5 bar [1 bar = 100kPa]
Ambient temperature range -20 to +85°C
fluid (✷) | temperature range (TS) | diaphragm (✷) |
air | -20 to +85°C | CR (chloroprene) |
ELECTRICAL CHARACTERISTICS
Coil insulation class F
Connector Spade plug (cable Ø 6 - 10 mm)
Connector specification ISO 4400 / EN 175301-803, form A
Electrical safety IEC 335
Standard voltages DC (=): 24V
Delivery
1. If the products we have in store, we will send it out ASAP after
payment.
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL
will be normal ways. If you require use of a courier, we can do it.
Competitive Advantage
Our product features Our Services Guarantee:
1) Competitive price 1) Prompt respond (Reply with 24 hours)
2) Good quality 2) Free Samples (Customer pay for the delivery
cost)
3) Professional Packaging 3) Registration support.
4) Produce according to Customers’ instruction 4) Photos/videos are
available during production.
5) None delay shipment 5) Loading inspection, and send loading
photos before shipment.
After-sale Service
We can provide a series of after-sale service, such as product
introduction, mounting, debugging, technical support and so on.
