heat resistant insulation board magnesium oxide panel production
line machine
Magnesium Oxide Board (usually called MGO Board) is the building
material widely used in the construction area.
The stable magnesium colloid is reinforced by middle alkali glass
fiber net and stuffed by light material then becomes new frameless
decorative material. 100% no asbestos contained and no
radioactivity.
Technology index
| serial number | Inspection items | Standard requirement (thickness 8mm) | inspection results |
| 1 | Flexural strength | >8.0 | 10.3 |
| 2 | Impact strength | >1.5 | 4.84 |
| 3 | performance density | 0.7<p<1.0 | 0.92 |
| 4 | Back to halogen resistance | No water, no get damp | No water, no get damp |
| 5 | Dry shrinkage | <0.3 | 0.21 |
| 6 | Wet bilge rate | <0.6 | 0.40 |
| 7 | With screw force | >15 | 61 |
| 8 | The chloride ion content | <10 | 2.96 |
| 9 | The factory of moisture content | <8 | 7.5 |
10 | incombustible | The average temperature in the furnace |
<50 |
8 |
| The average combustion duration |
<20 |
0 |
| The average mass loss rate |
<50 |
47.5 |
Product
About this production line ,among which ,Glue
spreading-overlaying-drying Machine and Glazing Machine are
equipment which will give the advanced processing to the board .the
above two machine s can overlay and glaze the magnesium oxide board
or orinary wood board . The Glue spreading-overlaying-drying
Machine can overlay wood-grain paper,PVC film .The Glazing Machine
will glaze the overlaied board with wood-grain paper,and make the
board with bright light or dull light .The above processing will
replace former painting working processing .(because the wood-grain
paper is not wearable and it has no gloss degree)
Technoloy features
There is not any requirement about high temperature and high
pressure during production processing .the boarad will be formed at
one time after roller-extruding under the conditions of normal
temperation and normal pressure .this is a green
environmental-protection project, because that there is no waste
water ,waste materials and waste gas during its production
processing .the finised board don’t need high temperature drying
,air-drying and watering ,and under the normal temperature ,they
will dry well indoor .
Excellect service
1)Fully life-cycle value services
Our company provides mgo board production line design ,cost
accounting,installation and operation,equipment maintenance and the
whole life cycle techincal support
2)all-around thechnical service
We provide technical formula for clients,to help clients to occupy
the leading position in the market.
3)complete data specification
Provide production line equipment technical data and
instructions,and provide the mgo board production line formula.
4)quality commitment
The company regards product quality as the lives of enterprise,the
main components and wearing parts are made of high quality
wear-resistant materials and advanced processing technology,so that
the equipment endurable and wear resisting ,wearing parts warranty
for one year.
