It is easy and ready to use, connect to the power supply, put the
rope senser cable onto somewhere you want.
When the sensor cable touch water, it will sound a alarm.
This water leak detection sensing cable provides distributed linear
water leak detection at any point along its length allowing full
coverage around vulnerable infrastructure such as power and data or
critical equipment and sources of possible leaks.
Water leak detection sensing cable is lightweight, anti-abrasion
and corrosion-resistant.
It is also mechanically strong and flexible allowing easy
installation on site.
Supplied in a range of factory terminated lengths. It will pass
through a 20mm (3/4 inch) hole.
Simply plug together to form the required length.
Its rugged construction exposes no metal sensing elements allowing
it to be used in mildly corrosive applications
This leak detection sensing cable is ideal for area’s where no
water leaks should be present. It is particularly suited to
shadowing pipe runs below false floors and ceilings. Attaching
directly to pipework is also possible, but an insulating barrier
tape should be used on foil lagging.
Other length of leak detection sensing cable is available: 5
meters, 10 meters, 15 meters, 20 meters, 50 meters, 100 meteres e.g
Sensor working temperature range:
32 to 167ºF (0 to 75ºC), 0 to 95%RH, Non-condensing
Attached -40 to 185ºF (-40ºC to 85ºC), 0 to 95%RH, Non-condensing
Package including:
1 x 3 meters sensor cable
1 x 2-meter lead jumper wire
1 x water leak alarm detector
1 x 110v - 220v power supply adapter
