600KW Generator Inline 12 Cylinder Diesel Engine Compact Design
KTA38-G2
General Data:
| Diesel engine model | KTA38-G2 |
| Manufacture | Chongqing Cummins |
| Rated power | 664 KW | Standby power | 731 KW |
| Rotated speed | 1500 rpm | Bore * stroke | 159*159 mm |
| Cylinder | 12 | Arrangement | V type |
| Configuration | Cast iron, 4 stroke | Displacement | 38 L |
| Oil pan capacity | 138 L | Engine Coolant capacity | 124 L |
| Oil consumption | 1.2 g/kw h | Fuel consumption | 209 g/kw h |
| Compression ratio | 14.5:1 | Max coolant temperature | 104 ℃ |
| Max back pressure | 10 KPa | Intake Resistance | 2.49 kPa |
| Net. Weight | 3750 Kg | Intake type | Turbocharged inter cooling |
| Cooling type | Compulsive water cooling | Mode of speed regulation | Electronic regulation |
| Starting voltage | 24 volt, Electric started | Overall dimension (L*W*H) | 2347×1412×1907 mm*mm*mm |
KTA38 Diesel Engines Parameter:
| KTA38 Series For Generator Sets |
| Engine Model | KTA38-G1 | KTA38-G2 | KTA38-G2A | KTA38-G5 | KTA38-G9 |
| Engine Features | V-Type, 12 Cylinders, Four-stroke, Direct Injection |
| Rate Power (KW@R/Min) | 634/1500 | 664/1500 | 813/1500 | 880/1500 | 900/1500 |
| Standby Power (KW) | 701/1500 | 731/1500 | 895/1500 | 970/1500 | 1089/1500 |
| Displacement (L) | 38 |
| Bore*Stroke (mm) | 159*159 |
| Cooling Type | Compulsive Water-Cooling |
| Air Intake Type | Turbocharged & Inner-Cooling |
| Compression Ratio | 14.5:1 | 13.9:1 |
| Fuel Consumption (g/KW.h) | 190-205 |
| Mode of Speed Regulation | Electronic |
| Oil Capacity (L) | 138 |
| Net Weight (KG) | 3750 |
| Over Dimension (mm) | 2260*1340*1660 |
KTA38 Diesel Engines Superiority:
1. Share Cummins parts.
2. Simple and convenient maintennance.
3. Small Volume.
4. High Power.
5. Fuel Save.
6. Low Noise.
7. Lightweight.
KTA38 Diesel Engines Standard configuration:
1. Elbow
2. Muffler
3. Taper joint
4. Bellows
5. Toolbox
6. EFC Governer
7. Sea Water Pump
KTA38 Diesel Engines Performance Characteristics:
1. Advanced fuel system enable direct injection so as to
efficiently lower fuel consumption while augmenting power.
2. PT Fuel injection system offers you options : may use mechanical
system or even better use CENTRY speedregulation system by electric
controlling.
3. Swaged forging crankshaft and connection bar make their life
longer.
4. Four valves, supercharging, and air intercooling elevate
discharge standard and increase power.
5. The compact design of four stroke and in-line has the size
smaller and weight lighter.
6. Design of one valve out fitting with one cylinder lower the
temperature of cylinder head efficiently, increase servicelife, and
facilitate maintenance.
7. Hierarchical variable timing system (STC) allows engine
toaccelerate with load smoothly, to control fuel injection
moreaccurately, and to elevate discharge standard.
Performance characteristics of K38 series engine:
1. Power coverage 756-1600 horsepower, maximum torque of 5469 nm.
The engine weight is 4200KG, big power to weight ratio.
2. Low fuel consumption and good economy:
Cummins patented technology of PT fuel system, high injection
pressure, to ensure good atomization of the engine and full
combustion.
3. Efficient Holset exhaust turbocharger can ensure the intake be
more fully, improve the efficiency of the engine, further improve
combustion and reduce engine fuel consumption.
4. Air to air cooling technology to ensure that the intake is more
adequate, and fuel economy is better.
5. Wet cylinder liner can be replaced, heat dissipation effect is
better, easier to replace.
All types of parts commonality, high degree of serialization,
convenient maintenance.
Our Service:
1. 100% finished products inspection before shipment. Beside
customer’s QC, we can help to do inspection and offer report.
2. We can palletize, make fumigation, supervise over loading,take
loading photos for you.
3. Offer CO, Form A, Form E, Form F and certificate legalized by
concerned embassy
4. One Year warranty for After-service.
