Downspout pipe roll forming machine
Technical Parameter
Item NO. |
Description |
Offered Specification |
1.0 | Roll forming machine | |
1.1 | Rolling speed | Up 15m/min(not include cutting time) |
1.2 | Rolling thickness | 0.3--3.0mm |
1.3 | Raw material | Galvanized steel sheet |
1.4 | dimension | 3500×1600×1500(mm) |
1.5 | Effective width | 60mm |
1.6 | Roller stations | 20 stations One stage for embossing
|
1.7 | Roller material | 45#forge steel, coated with chrome |
1.8 | Shaft diameter | Φ70mm ,material is 45# forge steel |
1.9 | Transmission | By chain 1 inch |
1.10 | Material of chain | 45# forged steel with frequency quenching, 12A |
1.11 | Material of cutting | Cr12Mov with quench HRC58-62° |
1.12 | Tolerance of cutting | 6m+-0.5mm |
1.13 | Frame | H type steel |
Main Components
3 tons manual
de-coiler----------------------------------------------------------1
set
Infeed
guiding----------------------------------------------------------------------1
set
Main roll forming
machine--------------------------------------------------------1
set
Straighten
device------------------------------------------------------------------1
set
Hydraulic cutting
equipment------------------------------------------------------1
set
Output
table--------------------------------------------------------------------------2
sets
Main
drive-----------------------------------------------------------------------------1
set
Hydraulic
system---------------------------------------------------------------------1
set
Controlling system (including
cabinet)--------------------------------------------1 set
Downpipe elbow forming
machine--------------------------------------------------1 set
Seaming
machine----------------------------------------------------------------------1
set
Working Flow of Roll Forming Machine
Standard profile of product
Photo Gallery
FAQ
1). Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can
produce more than 6 kinds of panels.
Besides, the width is adjustable.
2). Do you have after sales support?
Yes, we are happy to give advice and we also have skilled
technicians available across the world. We need your machines
running in order to keep your business running.
3). How to visit your company?
Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao
to Wuxi Station (30 minutes), then we can pick up you.
4). What can you do if the machine broken?
Our machines' warranty period is 12 months, if the broken parts
can't repair, we will send the new parts replace the broken parts
for free, but you need pay the express cost If after warranty
period, we can through negotiation to solve the problems, and we
supply the technical support for the whole life of the machine.
5). Can you be responsible for transport?
Yes, please tell me the destination port or address. we have rich
experience in transportation.
6). You are trade company or factory?
We are factories.
7). Why your price is higher than others?
As we persist on that factory should put quality at the first
place. We spend time and money on developing how to make machines
much more automatic, accurate and high quality. We can make sure
that our machine could use more than 20 years without any problem.
8). How long the machine could be made?
Normally speaking, deck floor roll forming machine could be made
about 60 working days. If you need machines in a hurry, we can try
it short time
