Trinocular Inverted Digital Metallurgical Microscope with Wide
Field Eyepiece 10X
Brief Introduction:
iqualitrol iMet-223 series metallurgical microscopes are used for
identification and analysis of the structures in different metals
and alloys. They are the important instruments for researching
metallography in metal physics.
The instruments can select special photography device to take
euploid pictures of atlas metallograph. The instruments are
suitable for scientific research,colleges and factory .
Technical Specifications:
| Model | iMet-223AT | iMet-223BT |
| Eyepiece | Wide field WF10X(Φ18mm) |
| Objective | Plan achromatic objectives with long working distance (no cover
glass) PL 10X/0.25 | Achromatic objectives(no cover glass) 10X/0.25 |
| Plan achromatic objectives with long working distance (no cover
glass) PL L20X/0.40 | Achromatic objectives(no cover glass) 20X/0.40 |
| Plan achromatic objectives with long working distance (no cover
glass) PL L40X/0.60 | Achromatic objectives(no cover glass) SP 40X/0.65 |
| Plan achromatic objectives with long working distance (no cover
glass) PL 100X/1.25(Spring, oil) | Achromatic objectives(no cover glass) 100X/1.25(Spring, oil) |
| Eyepieces tube | Trinocular, Inclination of 30˚ |
| Filter | Frosted filter |
| Blue filter |
| Green filter |
| Yellow filter |
| Focus system | Coaxial coarse/fine focus system, with tensional adjustable and up
stop, minimum division of fine focusing: 2μm. |
| Nosepiece | Quadruple(Ball bearing inner locating) |
| Stage | Double layer mechanical (Size:180mmX150mm,moving range:15mmX15mm) |
| Illumination unit | 6V 20W halogen lamp, brightness control. |
Features:
1, With plan achromatic objectives with long working distance (no
cover glass) and wide-field eyepieces, can get clear pictures and
wide view field.
2, Coaxial coarse/fine focus system, with tension adjustable and up
stop, minimum division of fine focusing: 2μm.
3, 6V 20W halogen lamp, brightness control.
4, Trinocular is compensation, can switch to observe normally or to
observe the Polarize, can send 100% of light to top photography
port.
Inverted metallurgical microscopes allow observation of opaque
objects that are too large to place under an upright metallurgical
microscope. Metallurgical microscope samples are placed on an
inverted metallurgical microscope and allow for inspection of grain
size and the state of the metals.
Inverted metallurgical microscopes are used in the engineering and
manufacturing processes to look for metal fatigue, corrosion,
fractures and ruptures that resulted from stress, cracks and
hydrogen embrittlement.
Optional Accessories:
| Name | Sort/Technique parameter | NO. |
| Eyepiece | Wide field WF16X(Φ11mm) | 1051016 |
| Dividing 10X(Φ18mm) 0.1mm/Div | 1021010 |
| Objective | Plan achromatic objectives with long working distance (no cover
glass) PL 5X/0.12 | 1051016 |
| Plan achromatic objectives with long working distance (no cover
glass) PL L 60X/0.75(Spring) | 2250160 |
| Plan achromatic objectives with long working distance (no cover
glass) PL L 100X/0.85 (Spring) | 2250111 |
| Achromatic objectives(no cover glass) 60X/0.85 | 2220160 |
| Eyepieces tub | Binocular, Inclination of 30˚ | 011008 |
| Nosepiece | Quintuple(Ball bearing inner locating) | 032001 |
| Simple polarizing unit | Polariser | 111002 |
| Polarization analyzer | 111102 |
| CCD adapter | 0.4X | 812001 |
| 0.5X | 812004 |
| 1X | 812002 |
| 0.5X with dividing 0.1mm/Div | 812003 |
| Camera | DV-1 With USB & video output | 800001 |
| DV-2 With USB output | 800003 |
| DV-3 With video output | 800005 |
| Photo unit | 2.5X/4X Change over photograph attachment with 10X viewing eyepiece | 840001 |
| 4X Focusing photograph attachment | 840002 |
| MD Adapter | 840003 |
| PK Adapter | 840004 |
| Digital camera adapter | CANON(A610,A620,A630,A640) | 821001 |
