Limplus 1800W submersible ultrasonic transducer Pack With SUS304 /
SUS316L
Specification details:
Model: LS-36T
Ultrasonic transducer box size (mm):620x500x100mm(LXWXH)
Housing material: SUS304/SUS316L
Surface finishing: Hard-Cr plating treatment (20+microns)
Ultrasonic frequency: 28KHz / 40KHz
Ultrasonic transducers: 36pcs
Ultrasonic power: 1800W
Electronic generator: LSG1200, Ultrasonic generator work separately
control transducers
power supply: AC 110V/220V or 220/240V, 1,13AMP
The transducer box can just put on the bottom of the water tank, or
hang on the wall or fixed on the wall by screw. Please choose cable leadout method convenient for your water tank.
Please choose the convenient cable leadout method according to your
tank.
Features:
1. Box size can be customized.
2. Varies cable leadout method, flexible hose or rigid tube
3. SUS stainless steel housing Hard-Cr plating Treatment ( 20 +
microns )
4. Multi frequency is also available.
5. Industrial BLT type transducer.
Transducer box system specification:
| Model | Unit Size (mm) | Ultrasonic Power(W) | Frequency (kHz) | Transducers (pcs) | Material | Voltage |
| LS-06T | 280*180*100 | 0~300 | 28/40 | 6 | SUS304/SUS316L | AC 110V/230V, 1phase |
| LS-12T | 360*250*100 | 0~600 | 28/40 | 12 | SUS304/SUS316L | AC 110V/230V, 1phase |
| LS-18T | 410*300*100 | 0~900 | 28/40 | 18 | SUS304/SUS316L | AC 110V/230V, 1phase |
| LS-24T | 500*350*100 | 0~1200 | 28/40 | 24 | SUS304/SUS316L | AC 110V/230V, 1phase |
| LS-30T | 550*420*100 | 0~1500 | 28/40 | 30 | SUS304/SUS316L | AC 110V/230V, 1phase |
| LS-36T | 620*500*100 | 0~1800 | 28/40 | 36 | SUS304/SUS316L | AC 110V/230V, 1phase |
| LS-48T | 750*600*100 | 0~2400 | 28/40 | 48 | SUS304/SUS316L | AC 110V/230V, 1phase |
FAQ:
Q.: What are the advantages of ultrasonic technology over traditional cleaning methods?
A.: Minimize the use of manual labor
Make cleaning and degreasing without the use of organic solvents
Clean hard to reach areas of products and remove all types of dirt
Shorten the processes such as extraction, dispersion, purification,
chemical reactions
Eliminates costly mechanical and chemical cleaning of heat
exchangers
Q.: Which ultrasonic frequency is better for my parts?
A.: Frequency is suggested based on pollutants in the objects.
28kHz frequency is stronger, better for car/motor/truck/vessel
parts clean(remove oils, grease, pastes, etc. )
40kHz is better for pcb boards, electronic parts, etc.
Higher precision goods, higher frequency.
Q: How do I get the best out of my ultrasonic cleaner?
For best results, ensure the component being cleaned is fully
submerged in a suitable cleaning fluid and not touching the tank to
allow maximum cavitations.
