20Khz Ultrasonic cutter for Robotic plastic deflashing/cutting
machine
Specification:
Model | HSPC20 |
Frequency | 20KHZ |
Output Power | 800W |
Generator | digital generator, |
Handle | Φ60×300 |
Size of cutter | Blade replaceable |
Length of cable |
|
Outer skin | Aluminum |
Weight | 15KG |
Voltage | 220V / 110V |
Accessory | Cut blade 2pcs；
1.5mm special hex wrench 1pc；
Screw M3×4L 2pcs |
Material of cutter | Magnalium alloy, titanium alloy, stainless steel |
Description:
- Environment-friendly (No noise, no smoke, no air contamination)
- Smooth cutting of difficult-to-cut materials
- Small hand-held size(can be attached to automotive machinery arms)
- No special installation equipmen
Ultrasonic Cutting Machine is a class of device using ultrasonic
energy for cutting. Instead of using traditional blade cutting,
ultrasonic cutting has its advantages of smooth, reliable cutting,
accurate trimming, no deformation, no raising, fuzzing, spinning,
wrinkling etc. It can avoid the rough cutting-edge, coked edge,
fuzzballs and other shortcomings of laser cutting machine.
Ultrasonic cutting machine is used for cutting rubber, synthetic
fabric, cloth, plastic, sheet metal, food etc.
The cutting of food products using ultrasound is performed when an
ultrasonic blade comes into contact with the product to be cut,
the high vibration of 40,000 pulses per second, makes this product
very easily be cut even if it is of delicate or sticky texture
composition.
The much higher vibration does not allow any product to stick to
the blade. The cut is clean and without pressure on the product.
TYPICAL MATERIALS PROCESSED
- Aramid Prepreg
- Boron Prepreg
- Carbon Phenolic Prepreg
- Fiberglass Prepreg
- Graphite Prepreg
- Hybrid Prepreg
- Thermoplastic Prepreg
- Unidirectional Tape
- Aluminum Core Cured/Uncured Rubber
- Foam Core Sealant
- Nomex Core
- Phenolic Core
- Woven Fabric
- Braided Materials
Competitive Advantage:
★ The use of high power ultrasonic transducer vibrating element,
ensure the long time stable working
★ The cutting speed is improved greatly, the efficiency 10 times
higher than the traditional cutting knife.
★ Cutting all kinds of ordinary tool to cut products, solve
production problems
★ Can be installed high hardness blade, cutting blade can be
replaced, greatly reducing the use cost
★ Cutting tool complete varieties, can also be customized according
to customer process shaped cutting
tool
★ Installation, easy to use, almost does not change the original
cutting process
★ Can be used in the production of circular ultrasonic tool cutting
equipment, rolling cutting, suitable
for cutting special
★ Can use air-cooled, water-cooled design, adapt to various working
conditions and environment
Problem and solution:
Item | Problem | Cause description | Solution |
| Power switch to “I” the light is out | Power plug loose | Plugging in |
Power line break | Fix it yourself or send back |
Power switch bad contact |
Fuse is broken |
Power light and running light are OK | Air plug and socket not connected | Tighten the connection position |
Handle have abnormal Sound | Clean the card slot, use new blade |
Intermittently use, but the handle keeping hot | Please send it back |
Out-put air plug break |
Screw loose | Tighten the screw |
Running light is ok | Running switch bad | Please send it back |
20Khz Ultrasonic cutter for Robotic plastic deflashing/cutting
machine
