ISO9001Certificated Oxygen Generator in PSA Style with the Capicity
of 60Nm3/h purity 90%
Oxygen Generator Range
90%-99.9999% purity
1-2000Nm3/Hour capacity
NOTICE
The following parameters,drawings and photos are only for your
reference.The final accurate product infomation will be supplied with the quotation
packages.
Parameters
Oxygen purity: 90% - 95%
End pressure: 150 – 200 barG
Oxygen dew point: -60°C
Operating conditions: 5°C - 45°C
The process of oxygen generation plant
Oxygen Generator consist of two columns filled with molecular
sieve(CarboTech AC Gmbh). Pre-treated compressed air enters the
active column and follows up through the CarboTech. Nitrogen and
the other gases are being adsorbed while the oxygen passes through.
The active column is pressurized. When pressure is released, column
becomes inactive and completely regenerate. In order to secure
steady flow two columns are used, one is active while the other is
inactive. At the end of cycle they switch roles.
Oxygen from oxygen generator enters oxygen buffer. From there
regulated oxygen is fed into the high pressure oxygen compressor
where the oxygen is boosted and fed the filling ramp where oxygen
cylinders are filled.
Our comapct plant is built on the skid or frame with one central
electric socket enabling quick start up. All components are already
connected in the factory, so no extensive installation is required.
Working Principle
Atmospheric desorption PSA oxygen generator use the clean
compressed air as raw material,zeolite molecular sieve as the
adsorbing material ,use the pressure swing adsorption principle to
get the oxygen under normal temperature.According to the difference
adsorbing capacity of oxygen,nitrogen up the zeolite molecular
sieve surface,and the difference diffusion rate of oxygen,nitrogen
under ZMS,through Programmable Controller control the sequencing
valve open/close,complete Pressure adsorption ,Decompression
desorption process,complete Separation of oxygen and nitrogen ,get
the demanded purity oxygen.
Main characteristic
1. Use the man-machine interface,intelligentize control,operation
easy,supply the qualified oxygen in short time.
2. High efficiency fill in ZMS,tighter,solid,longer usage life
3. Use Siemens , OMRON PLC control and Germany BURKERT pneumatic
valve to change system automatically,working stable.
4. Pressure,purity,flow can adjustable,to satisfied customers’
requirements.
5. Whole sealing design,Structural tension ,beautiful
appearance,save floor area
Technical data Application fields
Purity:90%±3 Widely used in non-ferrous metal Capacity:1-1000Nm3/h
metallurgy,chemical industry,
Pressure:0.1-0.6Mpa cement produce,pulp,
Dew point:≤40℃ paper making,glass stoves
Waste water/gas treatment
Application scope
1. Medical.The generator can be set up to fill the hospital
pipeline directly and use the filling ramp as a backup system.
Oxygen cylinders can be filled simultaneously or during hours with
low consumption.
2. Metallurgy: For anneal protection, agglomeration protection,
nitrogenizing, furnace washing and blowing, etc. Used in fields
such as metal heating treatment, powder metallurgy, magnetic
material, copper process, metallic mesh, galvanized wire,
semiconductor, etc.
3. Chemical and new material industries: For chemical material gas,
pipeline blowing, gas replacement, gas protection, product
transport, etc. Used in fields such as chemical, urethane elastic
fiber, rubber, plastic, tyre, polyurethane, biological technology,
intermediate, etc.
4. Electronic industry: For encapsulation, agglomeration, anneal,
deoxidization, storage of electronic products. Used in fields such
as peak welding, circumfluence welding, crystal, piezoelectricity,
electronic porcelain, electronic copper tape, battery, electronic
alloy material, etc.
Packaging |
| Actual |
| Actual |
| The normal package is wooden box(Size: L*W*H). If export to
european countries,the wooden box will be fumigated.If container is
too tigher,we will use pe film for packing or pack it according to
customers special request. |
