Eelectrical Characteristics |
Contact Curren Rating | 0.5A Min. |
Voltage Rating | 40V AC (rms) |
Withstanding Voltage | 500V AC for 1 Min. |
Insulation Resistance | 100 Megaohms Min. |
Contact Resistance | 30 mΩ Max. |
Mechanical Characteristics |
Insertion Force | 44.1 N (4.5kgf) Max |
Withdrawal Force | 9.8 N (1.0kgf) Min.,3 9.2N( 4.0kgf) Max. |
Durability | 10000 cycles at 100±50 cycles per hour |
Environmental Characteristics |
Operating Temperature | -25ºC to +85ºC |
Test Description | Requirement | Procedure |
Visual Inspection | The inspection results should be compliant with the individual
specification | Before the qualification test, all these components shall be
examined the Features, Construction as per applicable specification
and documents |
Features:
1. With A Type/B Type/C Type and Mini USB variety of types of
public Socket Interface Design;
2. Installed in the form of DIP/SMT/clip wire/wire type available;
3. Flexible design of terminal contact area to ensure good contact
performance and long life requirements;
4. Meet a variety of welding equipment parameters temperature
requirements
Welding conditions:
1. Hand soldering
Use a soldering iron of 30 watts, controlled at 350º C
approximately 3 seconds while solder applying.
2. Wave soldering/Reflow Soldering
The peak temperature of the wave oven should be set to 260º C max.
Condition for soldering temperature
Material:
1. Housing: PBT White/Black
2. Terminal: Phosphor Bronze Plating Gold/Tin
3. Shell: BRASS Plating Ni
Specification:
Inspection for USB Connector Mechanical Performance
Test Description | Requirement | Procedure |
Terminal / Housing Retention Force | 0.40kgf /Pin Min. | Measure the contact retention |
Insertion Force & Withdrawal Force | Insertion Force: 4.50kgf Max. Withdrawal Force: 1.00kgf Min. | The specimen is mounted to mounting fixtures by the normal mounting
means. The peak force shall be recorded at the maximum rate of 25mm
per minute |
Durability | After 10000 cycles test, shall be no evidence of mechanical or
electric defects, and shall meet the requirements of connector
using. | 10000 insertion / extraction cycles at a maximum rate of 100±50
cycles per hour.
|
