5-10TPH Semi-automatic Tile Adhesive Machine
Introduction:
Semi-automatic Tile Adhesive Machine mainly produces ordinary
premixed mortar and special mortar. The whole production line
includes Wet Sand Drying System, Screening System, Storage System,
Weighing System, Mixing System, Bulk&Packing System, Dedusting
System, etc.
Advantage:
- Advanced design concept, with high production efficiency.
- High configuration and low failure rate.
- With special fault self-diagnosis system.
- High intelligent and modular design, with easy and quick
installation.
- High efficiency dust collecting system, energy conservation and
environmental protection
Dry Mortar Production Line Main Equipment:
Ploughshare Mixer&Agravic Mixer
Three-cylinder Rotary Dryer&Dryer Dust Collector
Bucket Elevator&Screw Conveyor
Probability Screen&Packing Machine
Dry Mortar Production Line Technical Parameters:| Parameter Name | Production Line Model and Parameter |
| Name | Unit | ZMZS5000 | ZMZS4500 | ZMZS3000 | ZMZS2000 |
| Design Capacity | TPH | 80-85 | 55-60 | 35-40 | 20-25 |
| Annual Capacity (300d/y*16h/d) | TPY | 400,000 | 300,000 | 200,000 | 100,000 |
| Mixer Model | / | ZMDH5000 | ZMDH4500 | ZMDH3000 | ZMDH2000 |
| Mixer Volume | m³ | 5 | 4.5 | 3 | 2 |
| Load Factor | / | 70% | 70% | 70% | 70% |
| Mixer Power | KW | 90 | 75 | 55 | 45 |
| Dryer Model | / | ZMST3275 | ZMST3270 | ZMST3265 | ZMST2560 |
| Dryer Capacity | TPH | 80-85 | 55-60 | 35-40 | 20-25 |
| Dryer Power | KW | 4*11 | 4*7.5 | 4*7.5 | 2*11 |
| Powder Silo Volume (Cement,Fly Ash etc) | m³ | 3*120 | 3*80 | 3*80 | 3*50 |
| Sand Silo Volume | m³ | 3*140 | 3*140 | 3*140 | 3*80 |
| Additive Silo Volume | m³ | 2*1.5 | 2*1.5 | 2*1.5 | 2*1.5 |
| Sand Weighing Volume | m³ | 3 | 2 | 1.2 | 0.6 |
| Sand Weighing Accuracy | % | ≤±1.5 | ≤±1.5 | ≤±1.5 | ≤±1.5 |
| Powder Weighing Volume | m³ | 1.5 | 1 | 0.8 | 0.4 |
| Powder Weighing Accuracy | % | ≤±1 | ≤±1 | ≤±1 | ≤±1 |
Production Line Overall Dimension | m | 22*15*28 | 22*15*28 | 22*15*28 | 22*15*28 |
| Total Installed Power | KW | 420 | 380 | 350 | 320 |
Dry Mix Mortar Raw Materials:
- Binders: Cement, hydrated lime, anhydrite, gypsum.
- Filler: Silica sand, quartz sand, limestone, dolomite, expanded
perlite etc.
- Mineral admixture: Ground granulated blast furnace slag, fly ash,
pozzolana, fine silica powder etc.
- Water-retention and thickening material.
- Chemical additives: Cellulose esters, superplasticizer, air
entraining agents, accelerating agents, retarding agents, defoaming
agents, hydrophobic agents, and etc.
Application Range:
- Bonding mortar: Masonry mortar, wall and floor tile adhesive
mortar, anchorage mortar etc.
- Decoration mortar: Decorative plaster, inner and outer wall putty,
colorful decoration mortar etc.
- Protection mortar: Water-proof mortar, anti-corrosion mortar,
self-leveling mortar, wear resistance mortar, thermal insulation
mortar, sound insulation mortar, repair mortar, mildewproof mortar,
shielding mortar etc.
Installation and Delivery:
Strict site three-level quality inspection system
- Installation captain inspection: Evaluate the installation level of
dry mortar mixing plant.
- Spot QA engineer inspection: Inspect the whole installation process
and key components.
- Service engineer inspection: Inspect the debugging and running
condition of whole production line.
Training System:
Provide professional staff training for customers
- Service engineer offers spot training and production line operation
manual.
- After-sales personnel visit customers on a regular basis.
- Design engineer provides professional service for customers for
free.
Company Information:
