30W LED High Bay Light 500 series
【1】specialty:
【A】 Adopting integrated Chip as light source with high lighting
efficiency(70`80LM/W) ,high CRI(Ra>80),good quality heat
dissipation,low light degradation.
【B】There is build-in dedicated power supply, input voltage:
AC90~264V,Power Efficiency:>87%,Power Factor:>0.97,constant
voltage, constant current. Over voltage over power over current
protection, lighting protection.
【C】Good aluminum alloy heat sink with good quality heat
dissipation, aluminum alloy equipment box, high strength, IP
65,small reflector cap for focusing the light, big one for
gathering the light, it achieves an ideal lighting effect.
【D】Can start up within 1-3 seconds, no flicker, anti-jamming, no
mercury, energy saving, environment friendly.
【2】 Shape Structure
Shell Material: Aluminum Alloy
Shell Color: Black
Weight: 3.2Kg
【3】Parameter
| Input Voltage | AC90～264V | Color Rendering Index | Ra＞70 |
| Freqency Range | 50～60Hz | Beam Angle | 120° |
| Power Factor | >0.97 | LED Reduction Rate | 1～3% / 1,000Hrs |
| Power Efficiency | >87% | Color Temperature | 2700～7000K |
| ED Working Voltage | DC18～24V | Working Temperature | -20℃～+45℃ |
| LED Power | 30W | IP Grade | IP62 |
| Total Power | 35W | Working Life-Span | >35000H |
| Luminous Efficiency | 70～80lm / W | Power Line | VDE 3×0.75mm2 |
| Connect Wire | Brown→L Blue→N Yellow Or Green→G |
【4】Diagram of degradation for Luminous
1,The data above has been got at a temperature of 25 celsius degree
and taking 1000 hours running by a nonstop way.
2,Degradation of luminous flux of LED lamps depends on
environmental conditions. The higher the temperature, the longer
the using time, the faster luminous flux drops.
【5】Photomatric Data
【6】Illumination Distance/illuminance/Irradiated Area
【7】Packing specification
Lamp Packing:(L)252×(W) 252×(H) 244mm 1PC/CTN 4.5Kg
Reflector Packing:(L)572×(W) 572×(H) 314mm 10PCS/CTN 7.5Kg
【8】Using and installing instructions
A.Installation Procedure
As Picture No.1 Showed, Install reflector on the heat sink, wrest
fixed screws very tightly
As Picture No.2 Showed, Wrest hanger into top cap, wrest lock screw
very tightly
As Picture No.3 Showed, Wrest the non skid lock screw to proper
position.
As Picture No.4 Showed, Hang the lamp on the installation site,and
screw down the non skid lock.
As Picture No.5 Showed, Hang chaining of steel wire on another
installation device.
As Picture No.6 Showed, Connect Live Wire/Null Wire/Ground Wire to
electric cable properly and switch on.
Attentions:
1,Only professional electrician can install the lamp, please check
the lamp very carefully before installation
2,Please install the lamp follow up the installation procedure,
make sure the screw has been wrested very tightly, the wires have
been connected properly, .Please operate according to Product
Instructions enclosed.
If you are interested in LED high bay light,please click LED high
bay lights for more information.
