250Ton Hydraulic Scrap Metal Shear Alligator Type Cutting machine
1. Product:
The Q43-2500 alligator shear is metal cutting machine. It used to
get qualified furnace charge through cutting diverse scrap shaped
steel section and structural metals at cold state like round steel,
square steel, angle iron, I steel, steel plate and pipe, etc. It is
commonly seen in the medium sized metal processing plant, steel
works, scrap metal recycling site and so on. If there is no power
at site, this product can be activated by diesel engine according
to the demands of users.
2. Technical Parameters:
| Model | Q43-2500 |
| Cutting Force | 2500Kn |
| Press Scrap Force | 260Kn |
| Length Of Blade | 1000Mm |
| Jaw Size | 285Mm |
| Motor Power | 18.5 Kw x 2sets |
| Cycle Time | Sec |
| Dimensions | 2650×1024×1880mm |
| Weight | 9500Kgs |
| Scrap Be cutted | Size of scrap be cutted |
| Round Steel | Φ70mm |
| Square Steel | 63×63mm |
| Angle Steel | 160×160×12mm |
| Channel Steel | 280×124×11.5mm |
| Steel Plate | 40×300mm |
3. Description:
The major strong points of the alligator shear are balanced and
steady transmission, stable running speed against load change.
Controlled by buttons, the machine is able to accomplish the
automatic cutting and manual feeding. Highly praised by customers
from Russia and Ukraine, this product has been sold nearly 300pcs
to these customers in the past two years.
This Q43 series alligator shear is mostly applied in the metal
recycled processing plant, disassembling field of scraped vehicles,
smelting and casting fields and other industries. It is able to
process the steel section in different shape and diversified waste
structural metal like round steel, square steel, angle iron, I
steel, plate steel and steel pipe into the qualified furnace charge
through cold cutting. Added with appropriate devices, our product
can work as the length shearing equipment for small sized steel
section in rolling mill.
4. Construction
In the standard structure of the alligator shear, the mainframe and
the hydraulic station are separated. Therein, the main frame is
composed of cutting blade holder, blade moving bracket driven by
shearing cylinder, holding plate driven by holding cylinder,
adjusting device and so on. As for the small nonstandard machine,
the mainframe and the hydraulic can be integrated together as
customers require. Moreover, the clamping cylinder can be removed
depending on the cutting conditions.
Operation Mode
Special design is in consistent with customers' needs. This machine
can apply manual feeding device, manual shearing system for single
cutting or automatic continuous cutting system. As to the small
sized machine, the foot pedal can be used for control.
5. Features
1.Under the hydraulic drive, this alligator shear is safe, reliable
and convenient for manipulation.
2. The blade opening length varies, including 400mm, 600mm, 700mm,
800mm, 1000mm, 1200mm, 1600mm and 1800mm. The shearing force is
classified into eight grades, ranging from 63ton to 500ton. Users
can select the machine with different force and blade opening size
in certain range based on the working scale and shearing
requirements.
3. It doesn't need the foot bolts to install the machine.
4. At the place where there is no power supply, the equipment can
be powered by the diesel engine.
6. Photos:
