Components for the simple slitting machine line: This line includes
Uncoiler, Feeding Guide, Slitting Machine, Cantilevering
Separating, Tension Control Board, Console and general electrical
equipment.
Technical parameter of simple slitting machine line:
Material of processible coiled plate: Apply for carbon steel plate
δ B≤ 700Mpa;
Thickness of coiled plate: δ =0.4_2mm;
Width of coiled plate: Slitting 1250mm;
Precision of slitting: Width tolerance: ± 0.02mm;
Slitting speed: 0_40m/min;
Loading capacity of uncoiler machine(feeding machine): 5T;
Coil I. D: 450-510mmmm;
Coil O. D: ≤ 1500mm;
Max Strips: 10 PCS.
Min. Strip Width: 70mm.
Knife pivot diameter of slitting: 120mm; Material 40Cr;
Slitting blade: 120× 220× 15; 10PCS
Material of slitting blade: 9CrSi;
Hardness of blade: HRC58_60 degrees;
Recoiler I. D: 508mm;
Power: 380V/3pH/50Hz;
The main components & damageable component in electronic equipments
is accordance with GB stipulation;
Overall Dimmension: 12000mmx4500mm (LXW).
Total Power: 48KW
Specifics details for simple slitting machine line:
Uncoiler: Loading capacity of: 5T
This is composed of bottom stand, frame, conical discharging tray,
manual pushing machine, etc.
Guiding (peer to peer) device
This is composed of worktable frame, guiding pole, adjustment
device, moveable plane plate, etc.
Slitting machine
Power part: This is composed of power-stand, decelerator, motor:
11KW, gear distributing case, coupler, spindle, connecting-cover,
etc.
Host machine: This is composed of bottom-stand, fixed torii, ,
knife pivot(φ 120mm, 2PCS), knife pivot lifting and pressing down
adjustment device, accompany of blade, separating cover, rubber
band.
