forged alloy UNS N06686 inconel bar

hastelloy c-4 c-22 c-276 c-2000 rod of low-carbon nickel-chromium- molybdenum alloys (UNS N10276, N06022, N06035, N06455, N06058, and N06059), low-carbon nickel-molybdenum- chromium-tantalum (UNS N06210), low-carbon nickel-chromium-molybdenum-copper alloy (UNS N06200), and low-carbon nickel-chromium-molybdenum-tungsten inconel 686 (UNS N06686), for use in general corrosive service

Rods 5/16to ¾ in. (7.94 to 19.05 mm), exclusive, in diameter, hot or cold finished, solution annealed and pickled, or mechanically descaled.

Rods ¾ to 3½ in. (19.05 to 88.9 mm), inclusive, in diameter, hot or cold finished, solution annealed, ground or turned.

Rods ¼ to 3 ½ in. (6.35 to 88.9 mm), inclusive, in diameter, solution annealed, cold finished, as cold finished, ground or turned (N06059 and N06686 only)

Chemical Requirements

Element

Composition Limits, %

Alloy N10276 Alloy N06022 Alloy N06455 Alloy N06059 Alloy N06058 Alloy N06200 Alloy N06210 Alloy N06686

Molybdenum 15.0–17.0 12.5–14.5 14.0–17.0 15.0–16.5 19.0 - 21.0 15.0–17.0 18.0–20.0 15.0-17.0

Chromium 14.5–16.5 20.0–22.5 14.0–18.0 22.0–24.0 20.0- 23.0 22.0–24.0 18.0–20.0 19.0-23.0

Iron 4.0–7.0 2.0–6.0 3.0 max 1.5, max 1.5, max 3.0 max 1.0 max 5.0 max

Tungsten 3.0–4.5 2.5–3.5 ... ... 0.3 max ... ... 3.0-4.4

Cobalt, max 2.5 2.5 2.0 0.3 0.3 max 2.0 max 1.0 ...

Carbon, max 0.010 0.015 0.015 0.010 0.010 0.010 0.015 0.010

Silicon, max 0.08 0.08 0.08 0.10 0.10 0.08 0.08 0.08

Manganese, max 1.0 0.50 1.0 0.5 0.5 0.5 0.5 0.75

Vanadium, max 0.35 0.35 ... ... ... ... 0.35 ...

Phosphorus, max 0.04 0.02 0.04 0.015 0.015 0.025 0.02 0.04

Sulfur, max 0.03 0.02 0.03 0.010 0.010 0.010 0.02 0.02

Titanium ... ... 0.7 max ... ... ... ... 0.02-0.25

Nickel remainderA remainderA remainderA Bal Bal remainderA remainderA remainderA

Aluminum ... ... ... 0.1–0.4 0.40 max 0.50 max ... ...

Copper ... ... ... 0.50 max 0.50 max 1.3–1.9 ... ...

Tantalum ... ... ... ... ... ... 1.5–2.2

Mechanical Property Requirements

Alloy Tensile Strength, min, psi (MPa)

Yield Strength (0.2 % Offset), min, psi

(MPa)

Elongation in 2 in.

(50.8 mm) or 4DA

min, %

N10276 100 000 (690) 41 000 (283) 40

N06022 100 000 (690) 45 000 (310) 45

N06455 100 000 (690) 40 000 (276) 40

N06058 110 000 (760) 52 000 (360) 40

N06059 100 000 (690) 45 000 (310) 45

N06200 100 000 (690) 41 000 (283) 45

N06686 100 000 (690) 45 000 (310) 45

N06210 100 000 (690) 45 000 (310) 45

Alloy Density

lb/in.3 g/cm3

N10276 0.321 8.87

N06022 0.314 8.69

N06455 0.312 8.64

N06058 0.318 8.80

N06059 0.311 8.60

N06200 0.307 8.50

N06686 0.315 8.73

N06210 0.316 8.76

sunnyofsteel (at )(g m a i l )(c o m)

We are professional supplier specialized in nickel alloy monel inconel incoloy hastelloy duplex stainless alloy steel flange pipe fittings tube round bar wire rod fasteners forging plate sheet butt welding socket weld threaded elbow tee reducer cap cross coupling weldolet sockolet threadolet nipple union plug insert blind shaft , etc. They are comprehensively used in petrochemical industry, chemical industry, fertilizers, electric power plant, coal chemical industries, nuclear industry, town gas, and Oil & Gas industries. 

Provide our esteemed customer '' ONE STOP '' service with '' Superior quality, Competitive price, Timely delivery and Considerate service''. 

Welcome both small and large orders. Expect our successful cooperation.

Accept the third party such as TUV SGS BV etc to test our products

Following is our products for your reference

1. Flange: WN welding neck flange, BL blind flange, SO slip on flange, SW socket welding flange, PL plate flange, TH threaded flange, LWN long welding neck flange, compact flange, orifice flange, reducing flange, spectacle blind, etc

2. Bar rod: black or peeled or bright or lathe polished surface

3. Wire: soft or half-hard or hard state wire

4. Pipe fittings: elbow tee reducer cap cross coupling union plug stub end weldolet sockolet threadolet etc

5. Pipe tube: seamless or welded

6. Fastener: bolt nut screw washer gasket stud threaded rod etc

7. Plate sheet coil: hot-rolled, cold rolled.

8. Forging: ring shaft hollow bar tube sheet plate round disc etc

Material: Nickel,nickel alloy, monel, inconel, incoloy, hastelloy, nimonic,stainless, duplex stainless,

monel 400,monel k500,monel k-500,

inconel 600,inconel 625,inconel 601,inconel 718,inconel x-750,inconel x750, inconel 690,inconel 783,

incoloy 800,incoloy 800h,incoloy 800ht,incoloy 825,incoloy 925,incoloy 6mo,incoloy 25-6mo,

nickel 200,nickel 201,

alloy 20,alloy 31,alloy 255,al-6xn,alloy 6xn, alloy 901,

hastelloy b,hastelloy x,hastelloy b-2,hastelloy b-3,hastelloy c-4,hastelloy c-22,hastelloy c-276,hastelloy c-2000,

nimonic 80a,nimonic 90,nimonic 263,

Duplex stainless 1.4462,1.4539,1.4547,1.4410,1.4466,1.4507,

s31803,s32750,s32760,s31254,s31050,s32550,S32205, UNS N08904,

904l,254smo,310moln,725ln,310lmod,duplex 2205, duplex 2507, 

A182 F20/F51/F53/F55/F44/F56/F58/F60/F61/F62/F904L, 

Stainless 304 304L 316 316L 317 317L 347 347H 310 310S 321 316ti, etc

alloy A350 LF2  A420 WPL6 WPL3 A333 GR.6 GR.3 GR.1 A234 WPB WPC

High pressure steel MSS SP75 A860 WPHY42 WPHY46 WPHY52 WPHY56 WPHY60 WPHY65 WPHY70 WPHY80