DC 6.5~100V 0~20A 4 in 1 Digital Voltage Current Power Energy meter
Large LCD Screen DC Voltmeter Ammeter MSEM-031
A. Function
1. electrical parameter measurement function (voltage, current,
power, energy).
2. The voltage alarm function (over voltage alarm thresholds,
backlighting and voltage flicker tips).
3. The power button clear function.
4. Power-down data storage function.
5. Large-screen LCD screen full display function (display voltage,
current, power, energy).
6. backlight.
B. display and key
I.Display Interface
Display voltage, current, power, energy parameters from the
large-screen LCD screen simultaneously.
II. Display Format
1. Power: measurement range 0 ~ 2kW
1kW display format within 0.0 ~ 999.9W;
From 1kW display format 1000 ~ 2000W.
2. Power: measurement range 0 ~ 9999kWh
10kWh within the display format 0 ~ 9999Wh;
Above 10kWh display format 10 ~ 9999kWh;
3. Voltage: test range 6.5 ~ 100V
Display Format 6.50 ~ 99.99V
4. Current: Test Range 0 ~ 20A
Display Format 0.00 to 20.00.
III. Button
1. The backlight control
By short press the button to turn on or off the backlight, the
backlight status automatic storage.
2. The power cleared
Step 1: Press the button until the power area show "CLr" character,
then release the button;
Step 2: At this point in the power consumption flashing indicating
the current status is cleared, if short press the button again, the
consumption data is cleared and cleared quit flashing
Step 3: If no key is pressed within five seconds, it means that the
power does not clear the data and exit cleared.
3. The voltage alarm value
Step 1: Press the button until the power area show "SET" character,
then release the button;
Step 2: After entering this state, the voltage of the high pressure
area shows the current alarm value, the current area displays the
current value of low pressure alarm, and the least significant bit
starts flashing, then you can press the button through the +1 bit
short, when there is no button operation When more than three
seconds, the automatic adjustment of the position switch from high
pressure to low pressure alarm alarm value has a value, a total of
six, the scope voltage alarm threshold set for the 6.5 ~ 99.9V;
Step 3: After setting, press the button until the display shows
"PASS" character indicates the setting is successful and
automatically exit the setting mode.
C. Notes
1. This module is suitable for indoor, not outdoor
2. applied load can not exceed the rated voltage and current.
3. The wiring order can not be wrong.
D. Specifications
1. Working voltage: 6.5 ~ 100VDC
2. Test voltage: 6.5 ~ 100VDC
3. Rated power: 20A / 2000W
4. Measurement accuracy: 1.0
Package content:
1 x DC 6.5~100V 0~20A 4 in 1 Digital Voltage Current Power Energy
meter
