220V SAA UL IP65 led flood light energy saving for outdoor lighting
remote controller RGB
We have 2 types of led flood light:
A: LED COB flood light: use COB led chip with external isolated IC constant current
driver
B: LED SMD flood light: use SMD2835/5630 led chip with IC linear constant project, no
driver, save cost
Advantage:
Power Factor: ≥95%
Luminous Efficiency(lm/w): 100-110LM/W
Dimmable: PWM or transformer dimmable
Color temperature(K): 2700-6500K
Shell color: Black
IP Rating: IP66
Material: Aluminum + tempered glass
Specification:
Remarks:
1. No electrolytic capacitor
2. High Power Factor >0.95;
3. Dimmable Available;
4. Customized input voltage, such as 230V, 110V and so on.
5. High Power Efficiency; waterproof IP66
6. Warranty: 2 years, Long life-span
7.Payment: By T/T ; 50% advance payment,balance paid before
shipment for bulk order;
8.Lead time:3 days for samples,7-15 working days for bulk order.
Features:
1). Using ultra-bright highest level Epistar LED chips with
proprietary encapsulation technology, realizing excellent
luminance, low brightness decline;
2). IC linear constant circuit without electrolytic capacitor is to ensure the lamp high PFC
3). Scientifically-designed heat dissipater with much better
cooling effect;
3). Great energy-saving effect, save energy by over 70% comparing
with traditional lamps;
4). Lamp surface treated with anodization, corrosion-resistant,
artistic appearance.
5). Long lighting distance and wide lighting areas
6). Watt: 10W/20W/30W/50W/70W/100W/150W/200W
7). Shape color: white/grey/black
Lighting Effect:
Details showing:
1. LED Chip: Taiwan Epistar SMD2835/5630 led chip, high lumen with
high brightness.
2. IC linear constant circuit without electrolytic capacitor to
reduce the driver cost, smart project to keep high PFC
3. Ultra thin die-casting aluminum fixture:After 4 mechanical
polishing, 7 grinding processing precision, strong texture, prevent
rusting
4. Full Aluminum condensing mask: integrated die casting, smooth
surface, light scattering is good, particularly soft, no glare
5. Efficient heat sink: made of high quality aluminum, corrosion
resistance, low surface temperature, high thermal efficiency, long service life
6. Rotatable solid support/holder: Slim design, easy to install and
operate, both sides have active screws to fix, easy to adjust the angle and accommodating the provinces
Application
Roads, parks, residential; aquarium exhibition hall, plaza
fountain, swimming pool
Installation Instructions:
(1) Before the LED flood light installation: firstly, must cut off
the power supply. This is the first step in the
installation of electrical equipment, and is the basis for safe
operation.
(2) Secondly, please check the power supply is DC or AC power
supply.
(3) To put the led flood light on the wall or on the ground, and
make a hole drilling on the wall/ground with
expansion screws, then install the lamp, locked with screws. The
mounting distance between the lamps is
determined according to the customer’s request.
(4) Connecting wires method(brown connect to live wire, blue to
neutral wire, yellow to earth wire, please
try to connect the earth wire to prevent the lamp shell with static
electricity.
(5) After the finish of installation, just open the swith, then can
be used.
Maintenance Instructions:
1. Please make sure that the power has been cut off before
maintenance.
2. Regularly clean the glass of the lamps to keep the light
transmittance of the led flood light.
3. The dust of the shell and the heat sink of the lamps need to be
cleaned regularly to keep good heat
dissipation.
4. Do not use water or strong corrosive solution for cleaning,
preferably with a dry cloth
Product Warranty Term:
Our product warranty is 2 years, under normal use conditions, our
led lamps quality assurance is based on
the product's correct installation, use and maintenance; due to
improper installation, use and maintenance
of products, and the product damage, does not belong to the scope
of the guarantee period, the company
will choose repair, replacement (parts) or replacement of new products,
etc. Exceeding the quality guarantee
period will be appropriate charged for materials and labor costs.
FAQ:
Q1.Are you factory?
A1.Yes.welcome to visit our factory/company or exhibition.
Q2. Is Your products the lowest price?
A2. Different price has different quality, we could assure you that
the same quality, we are much cheaper than other suppliers.
Q3. All products have a warranty?
A3.Yes. All kinds of products at least 2 years warranty. Any
defective products will be replaced during the warranty period.
Q4. What is the transportation?
A4.If small quantity , we suggest to send by Courier, such as DHL,
Fedex; If large amount,by sea shipping.
Q5. If the goods in transit damage, how to do?
A5. Products are pass strict inspection before shipping, if
damaged, we can replace.
Q6. Can we design packaging?
A6. Yes. we can make customer's own brand logo packing.
Q7. Can we add our logo on products?
A7.Yes.
Q8. can we customize product?
A8.Yes, If we have the ability to manufacture.
Our contact information:
Ado Electronics Limited
Sales manager
Linda Zhang
+86-13538861556
Skype:jane.zhang94
