8 Port Passive POE Injector, POE Adapter, POE Power Supply Module
POE-IJ808M1
POE (Power Over Ethernet) is a technology solution that, under the
case of no any change for current Ethernet Cat5 wiring/cabling
infrastructure, not only transfer data signal but also provide
direct current power for some IP based terminal device (like IP
telephony, Wireless LAN access point, Network camera, etc.).
POE technology can minimize the cost while ensuring the normal
operation of the existing network and the safety of the existing
structured cabling.
POE also known as power system based on local area network (POL,
Power over LAN) or Active Ethernet, sometimes it is briefly called
Power Over Ethernet, this is the latest standard specification of
transferring data and delivering power while taking advantage of
existing standard Ethernet transmission cable, and preserve the
compatibility between user and the existing Ethernet system.
IEEE 802.3 is new standard of POE in the base of Ethernet power
system, which add related standard in power over network cable
directly through IEEE 802.3, it’s an extension of existing Ethernet
standard, and it is also the first international standard in power
distribution.
Product Application
This is ordinary switching power supply, great protective
performance, superior stability and adaptability connecting with
power device, Its scope of application include security
surveillance, wireless access point, electrical machine,
communication equipment, health care products, centralized powered
device and those POE supported equipment.
Technical Specification
Item | 8 Port Passive POE Power Adapter Module (one-to-one terminal) |
Model | POE-IJ808M1 |
Appearance | Terrace type |
Product specification | 1×Bare PCB board; |
2×8 RJ45 Network Interface; |
1×DC Female Connector; |
1×Cable connector; |
1×Capacitance; |
1×Resistance; |
1×Indicator; |
1×Double Sided PCB; |
8 pairs one-to-one Data-in and Data & Power Out; |
Power Supply line 4/5 “+”; 7/8 “-”; Data line 12/36 |
It can powering and transferring data for 8 pcs of device at the
same time; |
Product Application | Engineer centralized wireless bridge, wireless AP, security
surveillance, network camera centralized power supply |
Input voltage range | DC 9-48V |
Input current range | 1-2A |
Power connection | 1. DC Male connector 5.5×2.1mm;
2. Screwing DC connecting terminal. |
Packing | PC Bubble pack |
DC Connector | Inner Positive “+” 2.1mm;
Outer Negative “-” 5.5mm |
Network Power Port | Pin 4/5 positive, Pin 7/8 negative |
Loading Test (0.5A)
Loading Test (2A)
