POE-S108T-1U
8 Port IEEE802.3at 10/100Mbps 25W POE Switch
2 Port Gigabit Combo (RJ45 & SFP) Uplink
3.6Gbps Bandwidth 250W Built-in Power Supply
POE-S108T-1U, 1U size 8 port channels rack mountable 25 Watts Power Over Ethernet Switch, is IEEE802.3at compliant and
IEEE802.3af down compatible, which data rate support is 10/100Mbps,
transmitt power up to 100 meters distance.
This 8 Ways POE switch is a network switch that has built-in Power
over Ethernet PSE injection. It simply connect terminal network powered devices (PD) to the
switch normally, and the PoE Switch will detect whether the PDs are
POE-compatible and POE-enabled power automatically. So, there will
be no damage of any related devices results from the advance Power
Classification of PD and supply appropriate power to the terminal
device accordingly.
Here are why we should use PoE Switch:
1. Cost Saving: Comprehensive cost includes saving the time and
expense of unnecessary electrical power cable applied to
installation as PoE provide Ethernet data along with power over
just a single network cable without any electrical device such as
power plug near the powered device;
2. Flexibility: Users can have devices such as IP Network Camera,
Wireless AP, etc. installed at anywhere they need mostly as there
is no limitation of power input socket around. Powered Devices are
also relocatable as required.
3. Safety: PoE switch provides intelligent power supply to powered
device which is dedicate to protecting connected terminal network
device from overload, underload or incorrect installation.
Main Features
1. IEEE 802.3at compliant Power over Ethernet Switch
2. 10/100Mbps Ethernet data rate
3. 8×100M bit Auto-MDIX PoE port, 1 Gigabit RJ45 uplink, 1 Gigabit
SFP Uplink
4. Optional Uplink (RJ45/SFP) port, simultaneousely using is
forbidden
5. Maximum 30 watts ourput for a single PoE port
6. Automatical detection of the power class level for PoE PD
7. 3.6Gbps Backplane Bandwidth
8. Forwarding rate: 100 Mbps/148,800 pps; 10 Mbps/14,880 pps
9. Status LED: System Power, PoE, 100 Mbps, and Link/Activity
10. Full wire-speed non-blocking reception and transmission
11. Store-and-forward switching method
12. Back pressure Flow Control for Half-Duplex mode
13. IEEE 802.3x Flow Control for Full-Duplex mode
14. PoE-PSE power up only connected PD and unused port will be in
standby mode
15. Sturdy rack mountable metal enclosure, Plug and Play
16. Easy installation and using, no need to convert by software and
network protocol
17. One year limited warranty
Detailed Specification
Item: 8 Channels Power Over Ethernet Switch (25W POE)
Model: POE-S108T-1U
Network Interface:
- 10/100Mbps automatically link RJ45 port with POE output (1-8
port)
- 10/100M/1000Mbps automatically link RJ45 port (port 9)
Transmission Rate:
- 100Mbps receiving and sending, 10 or 100Mbps receiving/sending
- Network port: 10BASE-T or 100BASE-TX RJ-45 port of Ethernet
Primary Performance:
- Bandwidth:3.6Gbps (no block)
- Network delay(10-100Mbps): max.20 microsecond (64Byte packet )
- Packet buffer memory: 96KB
- Database size: 1024 MAC addresses
Frame filtering rate:
- 10M port max.14,800 frame/s;
- 100 M port max.148,800 frame/s.
Protocol Standard:
- IEEE 802.3i 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3x Flow Control
- IEEE 802.3af Power over Ethernet
LED Status Indicator:
- System: power supply, POE maximum power
- Data Speed for each port, link, POE activity, POE fault
Power Supply:
- Max. POE power:200W(all POE ports, port 1- 8) Max.25w for each
port
- Max. power supply: 250W (48VDC)
Ambient Environment:
- Operating Temperature: 0°C~40°C (32°F~104°F)
- Storage Temperature: -10°C~70°C (14°F~158°F)
- Operating Humidity: 10%～90% Non-condensing
- Storage Humidity: 5%~90% Non-condensing
Electromagnetic Compatibility:
- CE Class B
- FCC Part 15, Class B
- VCCI Class B
- C-Tick
Safety Standard: CE(EMC/LVD), FCC, ROHS
Size: 440mm×180mm×44mm; Weight:0.8kg/piece
Warranty: One year
