APA101 APA102 Built-in IC SMD LED
Introduction
This kind of our LED is integrated with driver APA102 built in IC and wide application,
Increases safety by better device reliability and visibility.
APA102 as a new type of built-in IC for the three color chips packaged inside one 5050 SMD LED as dimming controlled LED.
These color chips an be RGB,or three single color chips, such as
the digital controlled pure white digital color smd led APA102
white and APA102 Warm white.
Adopting the CMOS process to provide threecolor RGB LED output
driver to
adjust the output with 256 gray scale and 32 brightness adjustment
,
APA102 built-in IC LED has 2 signal output cables,
one data,another is independent clock cable,
the clock and data are synchronized,so that the crystal cascade
piece of output
movement is carried out simultaneously.
Feature
CMOS process,low voltage ,low consumption
Synchronization of two-lane
Choose positive output or negative RGB three-color LED output
8 bit(256 level) color set ,5bit(32 level) brightness adjustment
Build-20ma constant current output
With selfdetection signal build in support for continuous
oscillation PWM output ,
can be maintained static screen
Save energy and maintenance cost
Create more than one billion colors
Entire cabinet comply with IP66
Replace neon lamp
Show Pictures of APA102 LED as below:
APPLICATION of APA102 LED
Landscape lighting,
LED strips,
LED screen displayer
Contact :Phil
Email: phil@szlcoe.com
Skype: ledcolor006
Mobile: 86-15920815681
Website:http://www.rgbledcolor.com
