pe Corrugated Optic Duct Cable Protection Sleeve Pipe Production
Line / PE Pipe Extruder
Quick detail:
1. Special single screw extruder for the use of polyolefine
material , high speed extrusion and effective plasticization.
2. This machine line is used to produce carbon-fiber pipe which
consisted of PE and Carbon.
3. PE Carbon wire reinforced Spiral Pipe Extruder Machine is mainly
used for producing PE spiral pipe. With a special technology, we
can add a steel wire in the middle of the rope when extruding the
pipe. So when the pipe is finished, it has a steel wire in it
already. When you want to put the electric wire or cable inside the
pipe, you can use the steel wire to draw it. You don't need to cut
the pipe. So it will protect the cable or electrical wire better.
Description:
1. PE Carbon Spiral Reinforcing Pipe Production Line
The PE spiral pipe production line is composed by :
a.Extruder with feeding machine 2.Die head&mould
b.vaccum calibration &water spray cooling trough 4.haul off
machine
c.winder for small diameter pipe ,or cutter for big diameter pipe
&unloading stacker
2. Pipe feature
a.Exterior Smoothly, No starving crack scuff and burr, No patency
foaming and uneven, No inclusion.
b.Good resistance to high and low temperature performance,oil
resistance,abrasion resistance,antistatic property
c. Good tensile strength and impact resistance.
d.Has good UV resistance. Black spiral protection sleeve product
line by adding a certain ratio of carbon black to enhance the
spiral sleeve UV protection properties. This is the black spiral
protection sleeve protective cover than the other colors better UV
performance reasons
3. The feature of the pe carbon sprial machine:
a. All kind of polyolefine material , multi-layers soiral
strengthening pipe can be co-extruded for various uses , 80% of
recycle material can be used in production. Optimumspiral bronze sizing sleeve , pre-cooling and powerful
vacuum suction device in the entrance , sutting for high speed
extrustion of pipes.
b. Specific design for spray cooling trough. cooling water trough
is made of stainless steel , high efficient cooling comes from
peculiar spraying riozzle and high efficiency water pump. three -
dimensional regulation , longtudinal move by motrop.
c. Matches machinery special composite die , this unit may use
composite extrusion underground corrugated optical duct.
The main technical parameters:
| Extruder | SJ-90/30B | SJ-65/30B |
| Die(mm) | 75-200 | 50-150 |
| Sizing water tank | SGZL-200 | SGZL-150 |
| Hauling machine | SLQ-200 | SLQ-200 |
| Winder | SQ-200 | SQ-150 |
Applications:
The pipe is mainly used to protect high pressure oil pipe,widely
used in electric,wire,postal service and basic constructive of high
way and seaport. The pipe has advantage of high strength, high
tecacity, anti-corrosion, no transformation, easy to transfer and
can be processed to any radian.
Competitive Advantage:
1. Good service and reasonable price
2. Technical assistance and good pre-sales and after-sales service
3. high quality
