Iron And Manganese Removal Mechanical Water Filter Tank With Rubber Lined Mild Steel Dn150 36m3/H

Defluorination mechnical filter tanks CS with rubber liner 1.0Mpa 36m3/h

Introduction

The Iron and manganese removal filter is with manganese sand filter media. Through catalysis of manganese filter to oxidize the ferrous iron and manganese ion in water into trivalent ion, and then absorbs with natural manganese sand to reduce the iron and manganese ions in water.

The aeration is adopted to oxidize ferrous iron and manganese ion into Fe(OH)3 and MnO2. Based on the iron and manganese content in water, jet flow aeration or hollow multi-surface ball built in aeration tower may be adopted. Iron and manganese removal filter is widely applied to the water purifications in drinking water, food, paper-making, and textile, printing and dyeing, beverage, pharmaceutics, electronics and thermal power generation industries.

Technical advantage

• Robust design, mild steel with internal rubber liner and anticorrosion surface treatment

• Proven process and most tested forms of water treatment

• Systems are robust with no moving parts inside the tanks

• Built-in control, forward and backwash piping and connection port

• Suitable with various filtration media

• Easily cleaned and maintained

• Resistant to fouling (clogging)

Specification:

Aerator

Applications

Fluorine containing water is absorbed by activated aluminum oxide and form into dissolvable fluoride. When defluorination capability decreases to certain limit, or say saturated, with regeneration of reclaiming agents, defluorination capability of the absorbent is recovered. Aluminum sulfate is adopted for regenerating clean at the ratio of 60:1 of the quantity of aluminum sulfate and that of defluorination amount. Regeneration concentration is 1% - 2%. After 3-4 months operation, use hydro chlorine solution (3.5% concentration) to clean and then rinse with defluorination water for 8-10 minutes.

Focus on low-carbon energy and environment protection technology, we design and manufacture fluid processing and control products to give our contribution to the sustainable energy develop.

Lots of mega projects have been installed with our products, Shanghai expo center, Shanghai Disney energy center, Beijing Z15 tower, Malaysia GDC energy station, etc. Our technology and practical application experience, allow us to provide our client with products and solutions which meet your expectation on building, improving and mainting equipment. The industries we served:

• New energy
• Petroleum and chemical
• Industrial energy
• Oil and gas
• Metals and mining
• Pulp and paper
• Water and waste water treatment
• Marine
• Power
• Refining
• Food and beverage
• Life sciences

Our R&D, customer experience and manufacturing center is located in the “Low energy building science center” Hanghzou, China. As a Provincial class Postdoctoral workstation by collaboration with China State Energy research institute, which ensure our advantage from technician, science research & development, equipment. Our main products includes: flowmeters, roots air blower, pump, as well as design consultancy on RO, UF, NF design.