Wind Turbine Generator (GL-PMG-30K)

* Interface provided for extension and braking system
* Low start up speed due to low cogging and resistive torque design.
* Gearless, direct drive, low RPM generator.
* High standard, quality components for use in harsh and extreme environments for wind turbines.
* High efficiency and Low mechanical resistance energy loss.
* Generator is designed using specially selected material and treated to resist corrosion and oxidation.
* Designed for reliable and long operational lifetime under long-term full output.
* Designed for 20-year operation life.
* Patent protected design.
v id="StyleTableProd">

Model number	GL-PMG-30K Horizontal	GL-PMG-30K Vertical
Rated rotation speed(RPM)	100
Rated output power(kW)	30
Shaft bearing	High standard NSK 23026C3 (Front) NSK 6220DDU (Rear)	High standard NSK 23026C (Front) NSK 6220DDU (Rear)
Weight(Kgs)	760	748
Rotor inertia (Kg. m 2 ):	2.45
Fasteners (nuts and bolts):	High standard Stainless Steel
Lamination stack:	High specification cold-rolled Steel
Windings temperature rating:	180 degrees Celsius
Magnet material:	NdFeB (Neodymium Iron Boron)
Magnets temperature:	Rated at 150 degree Celsius
Generator configuration:	3 Phase star connected AC output or rectifier DC output
Safety:	Capable of withstand short term shorting of the windings for braking effect at rated rotation speed. Class 1 electrical safety rated for prevention of
Starting torque(NM)	< 37
Phase resistance(ohms)	0.36