Frequency 50HZ Fireproof MgO Wall panel making machine for ceiling
wall skirting
1. Equipment information
our all equipment can produce board with same quality and
specification but different production.According to different
production,our equipment has 6 models for large-scale and
small-scale.
2. Production conditions
The production line for mgo board is composed of board-making
machine,glue-spreading and veneering-drying machine and glazing
machine.according to the production and the automatic degree, this
production line is divided into 6 models and three specifications
,such as large ,middle and small specification.The production line
for mgo board has :production workshop ,finished product workshop
and raw material warehouse .
workshop:100---1000m2,worker:3---6person,water:ordinary
water,electricity:1.1—10KW(according to different scale)
| Advantages |
| Number | Item | Content |
| 1 | Low cost | Low labour and raw materials costs |
| 2 | Long life | Up to 30 years |
| 3 | Recycling use | Reused for more than 8 times |
| 4 | Environment protection | Environment-friendly raw materials used |
| 5 | Flexible layout | adjusted according to your requirement |
3. Attention
The technology transfer fees of the composite mgo board:6000yuan
(If you purchase our equipment,then the technology fee is free)
Sign the contract printed by Industry and Commerce B urear
We provide national grade certificate of key new product, quality
and fireproofing grade ,and train2--3 technical personnel for you
till then they master the recevant technology.
4. After-sale
After purchase the equipmrnt ,we will teach relevant technology for
free,and will go to your factory for installation and testing until
you can produce the qualified product by yourself .our company will
train 2—3technical personnel for free until he can get the skill
.we will take responsibility for provide techinal consulation and
following –up service for a long time ,the equipment warranty
period is one year
TECHNICAL INDICATORS
| serial number | Inspection items | Standard requirement (thickness 8mm) | inspection results |
| 1 | Flexural strength | >8.0 | 10.3 |
| 2 | Impact strength | >1.5 | 4.84 |
| 3 | performance density | 0.7<p<1.0 | 0.92 |
| 4 | Back to halogen resistance | No water, no get damp | No water, no get damp |
| 5 | Dry shrinkage | <0.3 | 0.21 |
| 6 | Wet bilge rate | <0.6 | 0.40 |
| 7 | With screw force | >15 | 61 |
| 8 | The chloride ion content | <10 | 2.96 |
| 9 | The factory of moisture content | <8 | 7.5 |
10 |
incombustible | The average temperature in the furnace |
<50 |
8 |
| The average combustion duration |
<20 |
0 |
| The average mass loss rate |
<50 |
47.5 |
