Wear And Corrosion Resistant Machining Ceramic Parts Photovoltaic
Processing Equipment
In order to meet the needs of high quality and productivity of
metal wire drawing machines production,our company has successfully
developed the ZrO2 ceramic wire drawing capstans with the strong
technical supports from the relative university and research
institutes.The ZrO2 ceramics is a type of new hi-tech with the
following advantages which compared with traditional AI2O2
ceramics.
1. High strength and fracture toughness
2. High hardness and wear resistance
3. its coefficient of thermal expansion almost attain the common
metal
4. Low thermal conductivity Featured with high strength and
fracture toughness,ZrO2 ceramics has been well known as the
ceramics steel.
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost
effective technical ceramic material. It offers a combination of
superior mechanical strength and electrical properties, wear
resistance and corrosion resistance. The maximum working
temperature is up to 1700 °C with relatively high thermal
conductivity. It is also an electrically insulating material with a
high electrical resistivity. The good corrosion resistance makes it
insoluble in water and slightly soluble in strong acid and alkaline
solution.
Product Description
Precision Ceramics has years of experience designing and developing
technical ceramic solutions for a wide variety of applications and
industries. Wear And Corrosion Resistant Machining Ceramic Parts
Photovoltaic Processing Equipment. We offer this expertise to all
of our customers to ensure the best design and materials are chosen
for their specific application and needs. Wear And Corrosion
Resistant Machining Ceramic Parts Photovoltaic Processing
Equipment, Typically, our custom technical ceramic components and
parts we supply are used for one of three main reasons:
Wear And Corrosion Resistant Machining Ceramic Parts Photovoltaic
Processing Equipment
High temperature ceramics – crucibles, nozzles, lasers,
furnace/kiln fixtures
Wear And Corrosion Resistant Machining Ceramic Parts Photovoltaic
Processing Equipment
Wear and corrosion resistant ceramics – plates, housings, gages,
caps/lids
Wear And Corrosion Resistant Machining Ceramic Parts Photovoltaic
Processing Equipment
Electrical insulation ceramics – contact blocks, standoffs,
fasteners, spacers
Wear And Corrosion Resistant Machining Ceramic Parts Photovoltaic
Processing Equipment
Precision Ceramics is one of the world’s premiere technical ceramic
suppliers – contact us to see what technical ceramics we can create
for you.
Wear And Corrosion Resistant Machining Ceramic Parts Photovoltaic
Processing Equipment
| General Characteristics of Materials: |
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium |
High | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | Wear And Corrosion Resistant Machining Ceramic Parts Photovoltaic
Processing Equipment |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | Wear And Corrosion Resistant Machining Ceramic Parts Photovoltaic
Processing Equipment |
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance ,balance before shippment.
If you have any other question, pls feel free to contact us .
