Low Coefficient Of Friction Advanced Technical Ceramics Automated
Production Lines
properties will vary depending on the manufacturing method
and part configuration.
Typical Applications
- For MIM stainless steel parts vacuum sintering;
- For technical ceramics sintering;
- For magnetic materials kiln using;
- For positive electrode materials;
- For electronic magnetic materials;
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost
effective technical ceramic material. It offers a combination of
superior mechanical strength and electrical properties, wear
resistance and corrosion resistance. The maximum working
temperature is up to 1700 °C with relatively high thermal
conductivity. It is also an electrically insulating material with a
high electrical resistivity. The good corrosion resistance makes it
insoluble in water and slightly soluble in strong acid and alkaline
solution.
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components
for a wide range of application like Mechanical Equipment,
Electronic & Electrical, Oil Drilling, Medical, Chemical Industry
etc. According to actual application and customer's requirement,
the purities vary from 95%-99.7% and the forming methods will be
different. The forming methods applied in our plant include dry
pressing, isostatic pressing, injection moulding, extrusion
moulding. With experienced engineers and talented workers, we are
confident to offer high quality, high precision, complex components
for customers worldwide.
Product Description
Precision Ceramics has years of experience designing and developing
technical ceramic solutions for a wide variety of applications and
industries.Low Coefficient Of Friction Advanced Technical Ceramics
Automated Production Lines. We offer this expertise to all of our
customers to ensure the best design and materials are chosen for
their specific application and needs.Low Coefficient Of Friction
Advanced Technical Ceramics Automated Production Lines,Typically,
our custom technical ceramic components and parts we supply are
used for one of three main reasons:
Low Coefficient Of Friction Advanced Technical Ceramics Automated
Production Lines
High temperature ceramics – crucibles, nozzles, lasers,
furnace/kiln fixtures
Low Coefficient Of Friction Advanced Technical Ceramics Automated
Production Lines
Wear and corrosion resistant ceramics – plates, housings, gages,
caps/lids
Low Coefficient Of Friction Advanced Technical Ceramics Automated
Production Lines
Electrical insulation ceramics – contact blocks, standoffs,
fasteners, spacers
Low Coefficient Of Friction Advanced Technical Ceramics Automated
Production Lines
Precision Ceramics is one of the world’s premiere technical ceramic
suppliers – contact us to see what technical ceramics we can create
for you.
Low Coefficient Of Friction Advanced Technical Ceramics Automated
Production Lines
| General Characteristics of Materials: |
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium |
High
| low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | Low Coefficient Of Friction Advanced Technical Ceramics Automated
Production Lines |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | Low Coefficient Of Friction Advanced Technical Ceramics Automated
Production Lines |
If shape in rectangle, the size ranged:
Length L |
|---|
| 3 to 100 mm |
Width W |
|---|
| 1 to 75 mm |
if shape in round, the size ranged:
Outer Diameter OD |
|---|
| 5 to 50 mm |
Thickness TH |
|---|
| 0.3 to 2 mm |
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance ,balance before shippment.
If you have any other question, pls feel free to contact us .
