Air Cooled WOT Condensor for Freezer , which could replace of
copper tube aluminium fin condenser .
Due to high cost of copper tube , the markets require a new cheaper
type cesignondensers .
After our engineer design , test and improvement , we develop a
series of air cooled wire tube condenser , for which we use
8mm,6.35mm,4.76mm bundy tubes and 1.2mm/1.4mm steel wire to replace
copper tube and aluminium fins.
We increase the heat radiation areas and tube length , to make sure
the same exchanger effect with copper tube condenser.
Howeve , its cost is about 40% lower than copper ones .
Main material : 1. Bundy Tube : Φ4.76 ,Φ6 ,Φ6.35,Φ8,Φ9.52 , Wall
thickness : 0.7mm
2.Low carbon steel wire : Φ1.0~1.6mm
3.Bracket : Steel Plate (SPCC) ,thickness 0.6~1.5mm
4.Steel plate : SPCC , thickness 0.3~0.4mm
Structure : 1. Flate type of wire on tube condenser used at the
back
2. Bended or spiral type of wire on tube condenser used at the
botton
3. wrapped type of tube plate condenser
Performance : 1. Surface with electrophoresis coating to prevent
corrosion
2. Inner cleaness can meet requirement of R134A ,CO2 , cooling
system
3. Can meet different cooling capacity requirement .
Main production process : tube bending — welding —fix the bracket—
welding inle and outlet tube —leakage test— coating—floding and
bending —inspection—package
Technical ability : wire pitch »5mm
We can produce according to the drawing or sample supplied by
clients .
We also can help the clients design and produce different
condensers .
