Portable Vibration Test Machine, Small Vibration Shaker With 55kf.G
Sine Force
Introduction:
Minitype Vibration Test System
With light weight, small volume, convenient to move, ET series
standard vibration table is widely used in the acceleration sensor
calibration; vibration test, fatigue test and mechanical impedance
test of micro parts; at the same time, the ET series can also be
used for teaching and scientific research and laboratory.
Vibration test is a process of exciting or shocking some part or
device to observe its reaction in real environment. Vibration test
is widely applied in many fields, ranging from circuit board,
airplane, ship, rocket, missile, automobile, household appliance
and other industrial products.
Labtone can offer you the whole vibration and testing proposal, and
provide you with the quality certificates of products according to
national and international standards, including GB, GJB, UL, JIS,
DIN, ISO, BS, MIL, IEC and ASTM standards.
Features:
- Apply to high precision vibration meter calibration, mechanical
impedance test, vibration analysis of the vibration source
- Apply to various of sensor, electronic, electric machines and other
small lightweight vibration test .
- Apply to the basic test of vibration engineering education
equipment, etc.
Specifications:
| ET55 Electrodynamic shaker |
| Max. sine exciting force | 55Kg.f peak (550N) |
| Frequency range | 5～5000Hz |
| Max. displacement | 19 mm p-p |
| Max. velocity | 1.22 m/s |
| Max. acceleration | 30 G (300 m/s2) |
| Vertical load support | 20 kg |
| Armature diameter | Ф120 mm |
| Armature weight | 1.8 kg |
| Over all Dimension | 445mm L x 333mm D x 203mm H |
| Shaker weight | 97 Kg |
| Cooling type | Air Cooling by inner axial fan |
| PA500E Power Amplifier |
| Output power | 900 VA |
| Amplifier cabinet dimension | 430mm×200mm×500mm |
| Servo protection system |
| Functions: | FUSE, OSC ZERO, OVER DISP, OVER VILTAGE, OVER CURRENT, OVER HEAT,
EXT-TRIP, EXT-STOP |
