High Density Electric Cartridge Heaters in 12V ceremic core for
pellet burners
Description:
1) Cartridge heaters are an extraordinarily versatile and durable
product that is used to heat a myriad different processes from
heavy industrial – plastics and packaging applications to critical
care medical devices and analytical test instruments to being used
on aircrafts, rail cars and trucks. Cartridge heaters are capable
of operating at temperatures of up to 1400F and achieving watt
densities of up to 260 watts per square inch. Available from stock
or custom manufactured to your individual application need, they
are available in many different imperial and metric diameters and
lengths with many different style terminations, wattage and voltage
ratings.
2) Cartridge heaters are an excellent choice to use as a conductive
source for heating solid metal plates, blocks and dies or as a
convective heat source for use in a variety of liquids and gases.
Cartridge heaters can be used in a vacuum atmosphere with proper
design guidelines.
3) We carry an elite category of HIGH DENSITY cartridge heaters. No
other swagged cartridge heater is compacted to the extent of the
ones we carry producing excellent heat transfer capability and the
dielectric and physical strength necessary for long life and
outstanding performance.
4) If you are looking for a lower priced LOW DENSITY cartridge
heaters we have them as well. These heaters will give you good life
up to about 1000F, if you are much above that we recommend the HIGH
DENSITY cartridge heaters. You can use the filters to the right to
filter down to them.
Specification:
1) Voltage: 12-440v
heat up fast, within 15 minutes to target temperature
working temperature ≤1100℃
wattage tolerance: rated power lower than 100w, ±10%
rated power up than 100w, ±5%
Insulation resistance: cold ≥ 500MΩ hot ≥50MΩ
2) Commom cartridge can be devideded :
1) High power density (heat area sufuce power 10~25w/cm2)
Working temperature≤450 degrees.
2) middle,low power density (heat area sufuce power 5~11/cm2)
working temperature≤ 300 degrees
Votage:12~250V (or as requirment)
| Heat intensity | Not exceeding 30Wcm2 (advisable) |
| Power | Depends on the dimension |
| Escape of current (when cold) | <=0.1mA a 242 v. |
| Insulation (when cold) | 5 Min Ohmios 500 Watts minimum |
| Dielectric strength | 1500v. 1/seg |
| Working temperature | 750ºG max. |
| Tolerance of length | +/-1.5% |
| Tolerance of diameter | -0.01 a -0.06 m/m |
| Tolerance of cut of connexion | +/-15 mlm |
| Power tolerance (w) | 5 % - 10 % |
| Cold areas | Depends on length and diameter 5-25mm |
Application:
1) Mould,
2) food packaging machine,
3) glass machine,
4) wood working machine,
5) medical machine,
6) environmental machine,oven ect.
7) Packaging Equipment
Shipping:
