7dB Optical Fiber Attenuator Female to Male Type for LAN Network
Description:
The plug-in type fixed attenuators is high return Loss, FC,SC,ST,LC
male-female structure. The products meet the Telcordia GR-910-CORE
requirements.
Feature:
High power 1W continuous operation tested over 1000 hours
Precise attenuation
Return loss UPC >50 dB APC >60 dB
Low ripple broadband design for operation at both 1310 and 1550 nm
Attenuation range for SC, FC, and LC types 1 to 13 dB in 1 dB
increments, 15 dB, and 20 dB
Application:
Fiber optic systems
CATV and telecommunication systems
Receiver padding for optical receiver protection
Optical power equalization
Increasing dynamic range for apparatus
Specification:
Parameters | FC,SC, LC, ST, MU, DIN, MTRJ, Hybrid |
Attenuation Range | 0dB ~ 30dB |
Operation Wavelength | SM: 1260-600nm, or 1310nm/1550nm |
MM:850nm, 1310nm |
Return Loss | ≤50dB (PC) |
≤55dB (UPC) |
≤65dB (APC) |
Attenuation Accuracy | ±0.5dB (1 ~ 10 dB) |
±10% of Attenuation Value (11~30 dB) |
Polarization Dependent Loss (PDL) | ≤0.2dB |
Exchangeability | ≤0.2dB |
Repeatability | ≤0.2dB |
Durability | ≤0.2dB Typical 1000 matings |
Maximum Optical Input Power | 200mW |
Operating Temperature | -20 ~ +75°C |
Storage Temperature | -40 ~ +85°C |
Order Information:
SC/UPC-SM-5dB-Female&Male
Step 1: Connector type: FC, SC, LC, ST, MU
Step 2: Ferrule End-face: PC, UPC, APC
Step 3: Type: Single-mode, Multimode
Step 4: Attenuation: 1-10dB(1dB step), 15, 20, 25, 30dB
Step 5: Mode: Fixed, Female&Male, In-line, Variable
Step 6: Wavelength: 1310nm, 1550nm, 850nm, 1300nm
