MTRJ Fixed Fiber Optic Attenuator for Singlemode Multimode Fiber
Cable
Description:
Fiber Optic Attenuator is used in a wide variety of applications
and can satisfy almost any requirement where a reduction in power
is needed.
Feature:
Fixed Attenuator(Fixed Type FC, SC, ST, LC)
Female to male type ( FC, SC, ST, LC)
In-Line Attenuator(Fused and Fiber Jumpers Type)
High Return Loss(In-Line and High RL Type)
Exact and Stable Attenuation(Variable Type)
Application:
Testing equipment
Fiber optical CATV
Fiber optical sensor
Fiber optical telecommunication system
Fiber optic systems
Specification:
Parameters | FC,SC, LC, ST, MU, DIN, MTRJ, Hybrid |
Attenuation Range | 0dB ~ 30dB |
Operation Wavelength | SM: 1260-600nm, or 1310nm/1550nm |
MM:850nm, 1310nm |
Return Loss | ≤50dB (PC) |
≤55dB (UPC) |
≤65dB (APC) |
Attenuation Accuracy | ±0.5dB (1 ~ 10 dB) |
±10% of Attenuation Value (11~30 dB) |
Polarization Dependent Loss (PDL) | ≤0.2dB |
Exchangeability | ≤0.2dB |
Repeatability | ≤0.2dB |
Durability | ≤0.2dB Typical 1000 matings |
Maximum Optical Input Power | 200mW |
Operating Temperature | -20 ~ +75°C |
Storage Temperature | -40 ~ +85°C |
Order Information:
SC/UPC-SM-5dB-Female&Male type
Step 1: Connector type: FC, SC, LC, ST, MU
Step 2: Ferrule End-face: PC, UPC, APC
Step 3: Type: Single-mode, Multimode
Step 4: Attenuation: 1-10dB(1dB step), 15, 20, 25, 30dB
Step 5: Mode: Fixed, Female&Male, In-line, Variable
Step 6: Wavelength: 1310nm, 1550nm, 850nm, 1300nm
