10/100/1000M 2KM Optical Fiber Media Converter for FC Connector
Description:
Fiber media converter is the network communication device that
realizing smooth network upgrade without any additional cost.
It is high-performance, cost effective and flexible solutions for a
wide range of applications in the field of LAN campus network.
It completely conforms to 10Base-T, 100Base-TX, 100Base-FX and IEEE
802.3x standards, and can connect with Person Computer, SERVER, HUB
and SWITCH.
Features:
Card-type or Stand-alone type for your choice; suitable for
concentration management in 2U Racks
Broadcasting filtration function, automatic recognizing and
modifying address with Store-and-transmission
Broadcasting filtration function, automatic recognizing and
modifying address with Store-and-transmission operational mechanism
Cache size for 512KB, address table size is 4KB
Ethernet 10base-t or 100Base - TX 100Base - FX fiber media
transition
Supporting IEEE802.3, IEEE802.3U, IEEE802.3X, IEEE 802.3z/AB,
IEEE802.1d
Supporting full duplex flow control or half duplex backpressure
flow control, with auto negotiation function
Electricity support 100Mbps,10Mbps, both ends can use different
speed (full-duplex work bandwidth for line-speed 2XMbps)
Provide a link loss diagnosis, electric link and light links
diagnosis, dynamic data transmission,full-duplex/half-duplex, speed
indicator
Provide double RJ - 45 electrical automatic cross connection,
connect switchboard, concentrator
Optical fiber interface properties is good, good compatibility and
high reliability
Provide complete after-sales service and five years for maintenance
services
Application:
Converts Ethernet to fiber, fiber to copper/Ethernet, ensuring
optimum network scalability for connecting two or more Ethernet
network nodes (e.g. connecting two buildings on the same campus)
Designed to provide high-speed bandwidth for demanding large scale
work groups that require expansion of Gigabit Ethernet Network
Extend your Ethernet connection up to 0~120km away using fiber
optics
Creates an economical Ethernet-fiber/copper-fiber link for
connecting remote sub-networks to larger fiber optic
networks/backbones
Specification:
| Ethernet interface | One Ethernet port |
| Connector: RJ45 |
| Auto-adapt full/half duplex |
| Auto-adapt 10/100M |
| Both MDI/MDIX available |
| Optical interface | Connector: SC default, SC/FC/LC option |
| Optical port: 155M |
| Default: Dual fiber, single mode,25km, 1310nm |
| Optical module for single/multi mode,single/dual fiber and distance
from 20-120KM is customized according to different requirement. |
| Indicators | PWR, FLINK, ELINK,100M, DUP |
| Environment | Working temperature: 0℃~70℃ |
| Storage temperature: -40℃~85℃ |
| Relative humidity: <90%, non-condensing |
| Power: AC or DC power |
