CNC Machined Piston Shaft Pin Stainless Steel ANSI 431 Polishing 6
X 50 mm
Stainless steel piston shaft pin machined parts are made from
harden ANSI 431 material , multiple stepped sections with different
diameters , a groove slot in middle of piston shaft pin and cut
threads so that accelerate oil running , one end is shaft for
leading purpose during installation .
Material
Piston shaft pin machined parts are made from stainless steel ANSI
431 , chemical elements as following
| C | ≤0.20 |
| Mn | ≤1.00 |
| Si | ≤1.00 |
| Cr | 15.0~17.0 |
| Ni | 1.25~2.50 |
| P | ≤0.04 |
| S | ≤0.03 |
Specification
Customized piston shaft pin machined parts are decided dimensions
according to design requirements of applications
| Length | 50 |
| Max diameter | 6 |
| Thread | M5 |
| Thread length | 10 |
Tolerances
Quite strict tolerances for stainless steel piston shaft pin
machined parts .
| Min tolerance | 0.002 |
| Roughness | 0.8 |
| Flatness | 0.003 |
| Verticality | 0.01 |
| Chamfer | 45° |
Tolerances for unmarked dimensions
Linear
| Level | 0.5-0.3 | 3-6 | 6-30 | 30-120 | 120-400 |
| f | ±0.05 | ±0.05 | ±0.1 | ±0.15 | ±0.2 |
Angle
| Level | 0.5-0.3 | 3-6 | Above 6 |
| f | ±0.2 | ±0.5 | ±1 |
Flatness and straightness
| Level | 0-10 | 10-30 | 30-100 | 100-300 |
| H | 0.02 | 0.06 | 0.1 | 0.2 |
Verticality
| Level | 0-100 | 100-300 | 300-1000 |
| H | 0.2 | 0.3 | 0.4 |
Characteristics
Quite hard surface
Surface hardness ups to HV 450 after annealed and tempered
Strict tolerances
Min tolerance is up to 0.002 mm for high precision
Cutting threads special design
This design make shaft pin machined parts work more smoothly and
efficiently
High temperature resistance
Perfect thermal dissipation
Application
Stainless steel shaft pin machined parts are mainly used to piston
.
More CNC machined parts
We manufacture many CN machined parts cover stainless steel ,
carbon steel , aluminum , brass ,titanium and non-metal materials ,
and with high precision for complex products .
