15 x 30mm Nylon Driver Plastic Injection Molded Parts Fire
Resistant Class UL94V-1
Key features
Quick fixing with stability
Not easy to be broken
High tensile strength
Easy operation
Plastic nylon driver injection molding parts are used to drive
gears or other drive systems for smooth work , a pin hole at the
end of driver body and a hexagonal section is placed on round
section base and a square section under it for clasping , the
driver will be secured well by socket that same design with driver
body so that plastic nylon driver injection molding parts are not
loosen or slipped out .
Material
Driver injection molding part is made from plastic nylon PA66 .
Specification
| Length | 15 |
| Upper diameter | 10 |
| Lower diameter | 8 |
All sizes are millimeter
Tolerances
| Basic Sizes | Tolerance level |
| MT5 |
| A |
| 0-3 | 0.2 |
| 3-6 | 0.24 |
| 6-10 | 0.28 |
| 10-14 | 0.32 |
| 14-18 | 0.38 |
| 18-24 | 0.44 |
| 24-30 | 0.5 |
Physical Performance
| Density ( g/cm3) | 1.14 |
| Water absorption % | 3 |
| Shrinkage % | 1～2 |
Mechanical Property
| Tensile strength MPa | 60～80 |
| Elongation at break % | 2.2 |
| Bending strength MPa | 100～120 |
| Modulus of elasticity for bending MPa | 2000 ～3000 |
| Notched Impact Strength(J/m) | 60～100 |
| HR hardness | 118 |
Thermal Performance
| Normal working temperature ℃ | 80～120 |
| Brittle temperature ℃ | -30℃ |
| Melting temperature ℃ | 252 |
| Pyrogenic decomposition temperature ℃ | 350℃ |
| Matin heatproof ℃ | 50～60 |
Electric Performance
| Dielectric constant | 1.63 |
| Arc resistance sec | 130～140 |
| Specific volume resistance Ω·cm | 1.83×1015 |
| dissipation factor | 100～400 |
| Dielectric strength(kV/mm) | 20～30 |
Features
Good self-lubricant
Reduce friction and improve wear resistance
Resistant high temperature
Normally , the part can be operated smoothly at temperature 150℃
and thermal deformed temperature is up to 250℃ when parts with
glass fiber .
Perfect elongation
Elongation at break is 2.2% according to ISO 527 testing method .
Corrosion resistance
Good insulation
Specific volume resistance is 1.83×1015 and resistance to high
breakdown voltage support part to be good insulated .
Resistant impact
60 – 80 KJ/M2 normally .
Resistant fire
Generally , the fire resistance is UL94V-2 and UL64V-0 for special
parts .
Resistance to low temperature
Parts can be workable at -30℃
Environment friendly
Plastic nylon driver injection molding parts meet RoHS or REACH
environmental production standard .
Customized Service
Plastic injection molding parts with standard and non-standard are
available for us , and we are good at developing new projects with
complicated designs .
★ Professional design team
★ Skillful works
★ Quick delivery
★ Individual Service
