Professional Knob Torsion Testing Machine Digital Display 2N.m /
5N.m
Model: RS-6300D
Application:
This torsion testing machine is suitable for the torsion testing
for all kinds of electronic products and the hinges. Can measure
the torsion of positive rotation and reverse rotation, and have the
software to create the curves of testing, and can record the
testing data, the curves.
Specialties:
The testing conditions are set by computer (the angle testing
range, the original point of stroke, testing speed, testing cycles,
the pause time, to hold the time for the testing and so on)
Can print and save the testing data and curves (Torsion vs angle,
Torsion damping curve)
The title, products spec, testing date, operator, file No in the
testing report are editable.
The testing chart is Microsoft Access editing format, input the
testing data automatically and can save or print.
It can automatically judge the pass or failure for the testing
according to the set upper and lower limit value, and then create
the current testing data, such as the Max torsion, Min torsion,
Ave. value, ETC, and create the corresponding curves.
The torsion damping curve and report: to display torsion value
changing vs the testing cycles increase.
To adopt the Panasonic servo motor for the driving, has the 2500R
high pulse encoder, can make sure the right location precisely, and
low noise ,higher torque, can satisfy long time running .
Adopt the special auto-centering device, can auto correct and
reduce the tolerance when the specimen isn’t installing at the
centre of the axis in the testing.
Specification:
| The testing range | W450x D no-limit x H300mm |
| Max testing torsion | 2N.m,5N.m,10N.m(optional ) |
| Min. display torsion | 0.01N.m |
| Min. Angle display | 0.010 |
| Rotation angle | No limit |
| Testing speed range | 1~72000/min(Meet Amazon requirement :1~2sec reach 1.5N.m) |
| Size | W420×D320×H1150mm |
| Weight | 65kg |
| Power supply | 1∮,AC220V,5A or specify by customer |
Picture:
,
