PVC Plastic Pipe Production Line , Plastic Extrusion Equipment
Quick detail:
1. This machine group consists mainly of twin conical ( prarllel)
screws extruder , vacuum calibrating tank , tractor , haul-off unit
, cutting unit , tilter , ect. single screw extruder and haul-off
unit have applied inported A/C inverter , both vacuum pump and
driving motor have applied excellent products.
2. The drawing machine includes two-claw type , three-claw type ,
four-claw type , six-claw type , eight-claw type , etc. saw cutting
or planet cutting can be applied , it is additionally applied with
length measuring meter and thickness increasing device , the
property of machine group is reliable , the production efficiency
is high.
Description:
1. Two high efficient co-extrusion double screw extruders
2. It adopts excellent screw and new groove sleeve design, which
makes the extruder with bellow advantages: high plasticization
rate,smooth melt, stable production process, and enable the inside
and outside layer of the pipe to use different materials .
3. Corrugation forming block is made by special alloy material. It
has high precision, intensity and outstanding heat emission.
4. Nitrogen treatment of the mould surface. There is wall thickness
adjusting device in the mouth mould and can produce pipes of
different raw materials. 5. It has a flaring function, which can
reduce the investment and enhance efficiency.
6. The production line adopts advanced Simens PLC control system,
with human-machine interface operating system, has high
automaticity, easy operation.
7. The mould die is of high precision and the mould blocks are
changeable. There are two cooling modes
to the mould block, by water and by fan. The planetary cutting
machine is of high cutting precision; SIMENS
human-machine interface control system realizes high automation.
The production line is able to produce
PE double wall corrugated pipe.
8. The extruder can be designed according to the different
materials; HDPE material uses high efficiency
single screw extruder, the PVC material uses large conical
double-screw extruder or double-screw extruder
Specifications:
Model | Main Machine (extruder) | Quantity of Module | Specification of Pipe(mm) |
SDSB 160 | SJ 65/33×2 (PE) | 40 | Φ50-Φ160 |
SJSZ 51×105, SJSZ 65×132 (PVC) |
SDSB 800 | SJ 150/35×2 (PE) | 40 | Φ400-Φ800 |
|
Applications:
The pipes are widely used in the fields of electricity wire sleeve,
urban water supply and drainage system,
agricultural irrigation pipe, underground filtration irrigation and
the water supply or drainage system in buildings, etc.
Competitive Advantage:
1. Pipe Diameter 50-800mm
2.High Efficient Single Screw Co-Extruder
3.Definitely Impressing Quality and Price
