Limplus Shutter Window Blind Ultrasonic Cleaner with Drying Tray
Rinsing Tank LS-4802
Blind ultrasonic cleaning machine theory:
Traditionial cleaning method of dirty blinds is brush, and need a
worker to do this carefull and slowly. This may cost time and huge
labor cost.
Ultrasonic cleaning technology accomplish the cleaning task within
seconds, only 15~30seconds per blind.
Advantages of ultrasonic:
1. minimize the use of manual labor
2. make cleaning and degreasing without the use of organic solvents
3. clean hard to reach areas of products and remove all types of
dirt
4. shorten the processes such as extraction, dispersion,
purification, chemical reactions
5. eliminates costly mechanical and chemical cleaning of heat
exchangers
Features:
1. minimize the use of manual labor
2. Clean hard to reach areas of products and remove all types of
dirt.
3. Expand your current business via provide cleaning service to
customers.
4. Save time and labor cost, make hands free.
5. Extend the life of blinds.
Package:
1. packed with LLDPE Stretch film to avoid scratch with wooden
case.
2. Well packed with export wooden case.
Specification:
| Model No. | LS-4802 (With double tank) |
| Ultrasonic Tank | 2200x200x400mm |
| Rinsing Tank | 2200x200x400mm |
| Unit size | 2380x630x620mm |
| Ultrasonic Power | 2400W/ultrasonic tank |
| Heating power | 3KW / ultrasonic tank |
| Timer: | 1~99min adjustable |
| Frequency | 40KHz |
| Ultrasonic Tank capacity | 176liter |
| Optional | Drying rack, Drying tray, Air bubble |
| Tank material | SUS304, T=2.0mm |
| Warranty time | 1 year |
| Heater | 20~80C adjustable |
| Transducer number | 48pcs for ultrasonic tank. |
Remark: Other size is also no problem for Limplus. OEM/ODM are
welcomed!
FAQ about Limplus blind ultrasonic cleaner
Q.: How to make money via Limplus blind ultrasonic cleaner?
A.: All of our blind cleaners with castor, can be move to anywhere
you need. you can provide removable service to customers.
Q.: How Do I maintain my Ultrasonic Cleaning System?
A.: There are several tips and rules to follow when using an
ultrasonic cleaner for getting the best performance possible.
1. Location Locate the cleaner in an area where you have plenty of
room to stage your parts prior to cleaning and where you have room
to stack the clean parts after cleaning. Do not block the generator
airflow as this will overheat the generator and cause a loss of
cleaning action and damage the electronics. If your generator is
separate from the tank make sure that it wont get wet when you are
cleaning parts.
2. Foil Test Get a base line for performance for your new tank;
Even if you cant afford a probe to test and record and ultrasonic
tank performance you can do a simple aluminum foil test to
determine your tanks initial performance and keep this record in a
book to compare to future records. To perform this test you will
need some aluminum foil Note: this test can contaminate a critical
cleaning system DO NOT USE!
