4 Inch SS 316L Manual Multi port Sanitary Diaphragm Valve U - B Tee
Type
Three way valve+ Sampling valve, designed to optimize dead angle,
but there are special needs of small branch pipe for the big pipe,
ideal straight pipes ≥DN50,export Branches and seat 1/2"-3/4"
Descriptions
Diaphragm valves, manually or pneumatically operated, are
specifically designed for use on hygiene and aseptic processes in
the pharmaceutical industries.
The valve is excellent for flow control as well as open/close
control.
The diaphragm valves are better in feature of flow in comparison
with other valves. It is eaiser to clean up and better to process
the substance with particles. The phenomenon of air pocket is
rare during application of flow control.
Specifications
Product Name: | Manual Multi port Sanitary Diaphragm Valve U - B Tee Type |
Valve Body Material: | SS316L |
Seal Material: | Single sillcone gasket/ Adhesive PTFE+EPDM/Two pieces PTFE+EPDM |
MaxWorking Pressure: | 6 to 10Bar(depending on diaphragm) |
Max.WorkingTemperature: | -30 degree c to 130 degree C (depending on diaphragm) |
Availably size: | 1''-4'', DN25-DN100 |
Availably connection: | Clamp / welding / thread / special connection |
Availably standard: | 3A / BPE / DIN / ISO / IDF |
Operated: | Manual,Pneumatic |
Availably structure: | Straight, tee, U-type, tank bottom |
Control: | Smart valve positioner / C-TOP control / position sensor |
Certificate: | 3A/54-02 (1580), PED/97/23/EC, FDA.177.2600 |
Application scope: | Dairy,food, beverage, pharmacy, cosmetic, etc |
Direction of valve: | Be upward |
Number of port: | Multi-port direction |
Valve Body:
Forging body blank is through a piece of stainless steel ingot, in the forging
process, alongwith the high temperature forging provide, through
extrusion blank shape change, through the forging after bodydendity
higher, the structure is more uniform, no sand hole and other
impurities. Then through theprocessing center carry on the high
precision machining.
Casting body is made by the mould paraffin wax model, paraffin wax model
infiltratiion in ceramic, to letthe whole body wax mold surface
form a layer of strong ceramic. Melt wax modl,then into the melting
ofthe stainless steel solution, after cooling knock off the
appearance of ceramic, blank body is made up.Casting size is very
accurate, the outward apperance is smmoth, clean and tidy.
Pneumatic Operation
1. Didaphragm valve with Positioner/Process Controller(IL-TOP)
2. Diaphragm valve with Control Unit(C-Top)
3. Valve position Regulator
4. Position Sensor Module
5. Stainless steel actuator
6. Plastic Actuator
Electric Operation
7. Electric Diaphragm valve
Manual Operation
8. Plastic Handle
9. Stainless steel handle
Valve Body Material
10. Body: Casting / Forging
Diaphragm :
Single Seal : For EPDM the temperature range about -10 to
120degree, And it is suitable for use in vacuum environment
EPDM+PTFE (Adhesive) : Temperature is the same with Single sea, But
For the PTFE diaphragm with high chemical resistance, High
Stability, Good Flexibility, Long life,high Sealing, No cold
Degeneration.It also can use for Steam disinfection System.
EPDM+PTFE(Separate), The Max Temperature can suffer 150 degree can
can work in bad conditions
And when you asked the quotation and didn’t mark the request, we
will provide the EPDM+PTFE(Adhesive) one
About the treatment : If for mechanical polished : Ra about 0.3 um
, If electric polished : Ra about 0.25um. Also can according
customer request
Product drawings
Product display
Tag : Diaphragm valves,Phamaceutical valves, Sanitary Valves
