High Strength End Trucks
Brief introduction of high strength end trucks:
1.Suitable to kinds of single and double girder overhead crane
1t-20t,span length is 7.5m-22.5m,
2.The girder can connect with end carrriage by welding or strength
bolts,we can leave the bolt hole according to clients' demands.
3.According to the wheel pressure,our end carriage adopt different
size wheel from 150-500mm diameter..Our wheel is with the character
of wear resistance.
4.Driving mechanism adopt three in one driving mechanism,
5.We produce as demands from clients.
Safety features of high strength end trucks:
Weight overload protection device,top quality long time bearing
polyurethane materials buffer,crane travelling limit switch,voltage
lower protection function,emergency stop system,current overload
protection system and so on.
Control method:Cabin or remote control or both,
Design and construction rules:All the standards which is required
for the crane is the Chinese standard.
Painting of high strength end trucks:
Primer and finishing paint,
Color:According to your demand,
Average thickness:About 100 microns,
Service:Design,manufacture,quality assurance,test,after sale
service,and we could provide turn-key installation as your demand.
Workshop of high strength end trucks:
The details of high strength end trucks:
User information:
The basic parameters should be informed by the users,for the
capacity,lifting speed,span length of main girder,and the size of
the rails,welcome to contact us by email or online,you will receive
our prompt and careful reply.
