Computer Servo Electronic Auto Tensile Testing Equipment
Universal Strength Test Machine
Universal Tensile Test Machine.pdf
Product Description
This series of Tensile Tester is widely used in wires & cables,
hardware, metal, rubber, footwear, leather, apparel, fabric, tape
paper products, pharmacy and so on, for tensile strength, tear
resistance, peel strength, bend strength, shear force , ect with
different fixtures according to national and international
standards customer required.
Tensile test machine is a kind of electric tensile tester which
uses the motor to drive ball screw to move fixture. Place the
fixture with sample between the upper and lower fixture, use a
given speed to pull sample upward by upper fixture. Load cell above
upper fixture will sense tensile strength, and convert the strength
into voltage sign and output to the display screen. And the
strength value will be displayed automatically.
Standard Features
| Item | Description |
| Max. Force | 2000 kg (20KN) |
| Load cell | Germany brand load cell for high accuracy |
| Control system | PC with windows 7 system |
| Motor | Panasonic servo motor w/ DC variable speed drive system,
high-precision mechanical ball screw rod |
| Force reading | kgf, Ibf, N, KN, T etc |
| Stoke | 1100mm including fixture |
| Load cell Resolution | 1/250,000 |
| Load Precision | within ±0.5% |
| Test speed | 0.01~500mm/min (adjustable) |
| Software | TM 2101 |
| Curves display | Load- elongation, Elongation-time, Time-elongation, Stress-strain |
| Data display | Max. force, speed, sample information, strength(Kpa, Mpa, N/mm,
N/mm2) etc… |
| Safety features | E-Stop Over-load protection Upper and lower limit switches Load sensor with automatic retreat |
Applications
1. Deformation under defined load: Test deformation under defined
load of tested sample
2. Load under defined deformation: Test load under defined
deformation of tested sample
3. Software can issue report with results for max. force,
elongation, tensile strength, peel strength, tear strength,
compression strength, etc.
4. This machine can do different test as per customer requirement
such as peel test, tear test, compression test, bend test with
different clamps.
Product Features
1. Motor system: Panasonic servo motor +Servo driver +High precise
ball screw (Taiwan)
2. Control system: a, computer control with TM2101 software; b,
Back to origin automatically after the test, c, store data
automatically or by manual operation
3. Data transmission: RS232
4. Displacement resolution: 0.001mm
5. Graph scale automatic optimization can make graph to display
with best measurement and can implement graphics dynamic switching
in the test and has force-elongation, force- time, elongation
-time, stress - strain.
6. It can save results automatically after test finished, and it is
manual filing. It can display maximum force, yield strength,
compressive strength, tensile strength, elongation, peel interval
maximum, minimum and average, etc.
7. User can set parameters of product material such as length,
width, thickness, radius, area and so on.
8. Languages: English.
About us
Haida International Equipment Co,Ltd was established in 2004, located in Dongguan city, Guangdong
Province, China, is specialized in production and R&D of
various material physical properties testing equipment. We have our
own independent research and development center and four testing
equipment production lines: textile, footwear, leather, mask. In
2006, textile, footwear, leather mask testing equipment officially
put into production and entered the international market.
