Description:
cleaning sweep truck is a multifunctional efficient sanitation
truck with the functions of sweep and cleaning. It has functions of
road surface cleaning, sweep, washing, scrub, rinse and dust fall,
especially for roads with lots sand and also requested high
cleanliness. This truck has the functions of sweep road truck and
high pressure cleaning truck, and high possibility to replace them.
Performance Feature:
1,Using the combined of scrub and high pressure cleaning, garbage
collection, wastewater recycling, hydraulic tilting discharge to
scrub the road surface. It is with the functions of sweep road
truck and high-pressure cleaning truck, finishing sweep, high
pressure cleaning, garbage and sewage collection in one time.
2,Concentrated devices, constant distance between nozzle and
ground, smooth movements on scrubbing-swashing-suction, less
spatter, high efficient on sewage absorption, wide cleaning width
and high efficiency.
3,The truck equipped with the advanced technological pressure water
control system, when the high pressure water pump starting and
working water valve switch, the pump can automatic unloading.
4,Garbage box is equipped with the overflowing alarm device and
high pressure spray cleaning device. The overflowing alarm device
can prevent sewage from straw overflow when working which would
cause secondary pollution. High pressure spray cleaning device can
clean the sewage box after dumping to reduce the labor intensity of
the operators greatly.
5,Water tank is equipped with low water level sensor alarm system,
It will alarm and automatically cut off the high pressure water
pump in time when water level is low, prevent damage of water pump.
6,Clear & sewage water tank are made of stainless steel materials.
china 10 tons garbage street sweep cleaning truck with high
pressure washing system
Technical Parameters:
| eneral Description |
| 1 | Driving type | 4*2, left hand drive |
| 2 | Overall Dimension | 5990*1980*2320 mm |
| 3 | Kerb weight | 4,300 Kg |
| 4 | Rated Payload | 6,000 Kg |
| 5 | Wheel base (mm) | 3800 mm |
| 6 | Fuel type | Diesel oil |
| 7 | Front/Rear axle | 3000 / 6000 Kg |
| 8 | Tire | 7.50-16, 6 +1 Pcs |
| 9 | Passengers | 3 |
| 10 | Volume of oil tank | 95 L |
| 11 | Gearbox | Six speed lever, 5 speed forward with 1 reverse, manual |
|
| Engine Description |
| 1 | Brand | Dongfeng |
| 2 | Model | CY4102 |
| 3 | Displacement (L) | 3.856 L |
| 4 | Emission Standard | EURO 3 |
| 5 | Rated Power | 120 Hp / 95Kw |
| 6 | Maximum Speed | 95 Km/h |
|
| Sunction sewer Description |
| 1 | Volume | 3,000L |
| 2 | Tanker thickness | 4 mm |
| 3 | Material of tanker | Q235 Carbon steel , Inside with Epoxyanti-corrosion technology |
| 4 | Pump type | Vacuum sewage suction pump |
| 5 | Vacuum degree (kpa) | 90 kpa |
| 6 | Pump speed (L/s) | 318m3/h |
| 7 | Full suction time (m) | About 6 minutes |
| 8 | Absolute working pressure | 10 Mpa |
| High pressure cleanning Description |
| 1 | Volume | 2,500L |
| 2 | Tanker thickness | 4 mm |
| 3 | Material of tanker | Q235 Carbon steel , Inside with Epoxyanti-corrosion technology |
| 4 | Pump type | Three-plunger pump, PRATISSOLI brand, from Italy |
| 5 | Flow | 122l/min |
| 6 | Max working pressure | 0 - 160bar |
| 7 | Safety devices | 1. Low water level protection
2. Water particles protection |
