It is a 3G/HD-SDI transmitter and receiver is the low cost transfer
device for one way SD/HD/3G-SDI video by single mode and multimode optical fiber cable
transfer. SD/HD/3G-SDI transmitter and receiver is designed by
digital optical transfer technology, transfer long distance one way
SD/HD-SDI video signal, one way reverse 485 control signal on one
single mode optical fiber.Support SMPTE292M.SMPTE259M.SMPTE424 signal.m
Features
•1/2/4/8 Channels Video of SD-SDI/HD-SDI/3G-SDI can be transmitted
via 1 single fiber
• The Max rate of work is 3.2Gb/s
• Support SMPTE 292M (2.9Gb/s) clock recovery
• Support standard of 1.485Gbps/M(HD-SDI/ SD-SDI),SMPTE 425M 3Gb/s
Mapping(3G-SDI),SMPTE 424M 3Gb/s serial interface(3G-SDI)
• Out wavelength range is 1310nm,1550nm and 16 other kind of CWDM
wavelength ( comply with ITU-T G.694.2)
• Automatic cable equalization ,used for all rate below 3.2
Gb/s(Belden 1694A)
• LED Status Indication to monitor the working conditions
• Video transmission system can support many application branches
structure
•The fiber port Support SFP transceiver hot-plugged
•The SDI video format support:
625/25 PAL
525/29.97 NTSC
525/23.98 NTSC
720p50,720p59.94
1080P 23.98/24/30/50/60
1080i 23/24/30/50/59.94
Typical application
Remark
•The Optical Power Budget fit
Multi-mode(62.5/125m),Single-Mode(9/125 m).
•When using 50/125 m multimode fiber, subtract 3 dB from the
optical power budget.
•Optical transmission distance is limited to optical loss of the
fiber and any additional loss introduced by connectors, splices and
patch panels.
•Maximum transmission distance is also limited by fiber bandwidth.
•Power adapter for stand-alone units is manufactured by third party
.Power adapter included US, European, UK or Australian power plug.
•Please feel free to contact factory for any special requirement
and customization
Specifications
