Stereo microscope zoom mag track stand upper and lower lighting
inclined head 95mm plate clips
Magnification: 7X-45X, 3.5X-270X with optional eyepieces and
objectives
Eyepiece: WF10X/20mm high-eyepoint, wide-field; Convenient for
observers wearing glasses
Optional Eyepiece: WF10X/20mm, WF15X/15mm, WF20X/10mm, WF25X/9mm,
WF30X/8mm
Main Body: Binocular head, 45° inclined, 360° rotatable, can be
locked in any position
Interpupillary Distance adjustment:54-76mm; Diopter adjustment:±5
diopters
Objective 0.7X-4.5X stereo zoom; Zoom Ratio:6.4:1
Aux Lens 0.3X, 0.5X, 0.7X, 0.75X, 1.5X, 2X
Track Stand
Vertical Height:300mm
Mounting Size:φ76mm
Focusing Distance:106mm
Top and bottom LED Illumination with an independent control
Input Power:110v~240v
With φ95mm B/W Plastic & Perspex Plate and Paired Clips
Base Size:205x275x40mm
stereo zoom microscope Features
1. The left and right beams in the binocular tube are not parallel,
but have a certain included angle-the body angle of view (generally
12 ° ~ 15 °), so the imaging has a three-dimensional stereoscopic
impression;
2. The image is upright, easy to operate and dissect, because the
prism under the eyepiece turns the image upside down;
3. Although the magnification can be up to about 200 times, its
working distance is very long. After adding an additional lens in
front of the objective lens, the working distance can reach 200mm;
4. The focal depth is large, which is convenient for observing the
whole layer of the object under inspection. At low magnification,
the focal depth can reach 5.6mm;
5. Large field diameter, up to about 65.7mm at low magnification.
stereo zoom microscope application
Suitable for electronic circuit boards, chip packaging, jewelry
identification, research phase analysis, micro-precision quality
control, assembly, public security, bank trace comparison, teaching
demonstration, clinical surgery samples, agricultural selection,
textile inspection, breeding industry selection Pathological
analysis. observation, assembly and inspection of micro-components
and integrated circuits on the production lines of PCB, LCD and
other industries, as well as the inspection of precision parts for
mechanical finishing.
Meet the requirements of high precision in modern biology,
medicine, scientific research, modern electronic industry online
detection and other science and technology industries.
