30MHZ high quality Vascular Removal,Veins rbs vascular removal
machine
1. Specification:
| Input voltage | 220V-50HZ/110V-60HZ |
| Input power | 150W |
| Output power | 0-100%±10% |
| Output frequency | 30MHz |
| Output voltage | AC 30-150V |
| Treatment of needle wire | 0.01mm(Diameter) |
| Output mode | Continuous and pulsed two modes |
| Liquid crystal display | 8.4Inch |
| Operating mode | Touching screen |
| Dimensions | 395×460×130mmg |
2. Advantages:
1. Easy Operation by beatician.
2. Technology:30M HZ high frequency. No pain at all.
3. Portable machine and it can be moved very easily.
4. Spider vein will be removed at once after treatment.
5. Blood vessel will be removed at once after treatment.
3. Treatment scope:
1.Vascular removal: face, arms, legs and the whole body • Pigment
lesions treatment: speckle, age spots, sunburn, pigmentation
2.Benign proliferation: skin excrescence: Milia, hybrid nevus,
intradermal nevus, flat wart, fat granule
3.Blood Clots
4. Leg Ulcers
5.Lymphedema
6.Blood Spider clearance
7.Vascular clearance , Vascular lesions
8.Acne treatment
4. Product introduction:
RBS net wire treatment instrument principle the micro-dots
high-frequency lightning produces a 30000000 Hz ultra high
frequency electromagnetic oscillation, with the unique soft silk (
than hair thinner ), at 1/ 100 second time break the hemoglobin,
will release the energy transfer to the surface of the skin
following removal of lesions, capillaries, and intravascular
hemoglobin break make it into small molecules are absorbed by the
skin tissue itself, so as to make it reach the disposable permanent
eradication of red blood results.
Each treatment of red blood streak time should not exceed15
minutes, precise digital control system, perfect and concise
treatment procedures, simple operation is beneficial to quickly
grasp. Two, install note1, instrument placed steadily at room
temperature - humidity of not more than 60%10-40, clean operation
room or in the treatment of indoor, or will cause the instrument
components cannot repair damage.
In 2, a foot switch installation will foot switch plug gaps in
alignment apparatus "F00T SWITCH" interface directly after
inserting holes, and the locknut screwing clockwise ( Note: during
the tightening process for plug and screw, until cannot insert and
tighten, prevent virtual connection ).
In 3, a power connection will power line connecting apparatus is
directly inserted into the apparatus"220V10A50HZ" interface, and
confirm the installation is firm.
In 4, the treatment head connecting the treatment head connecting
apparatus is inserted directly into the instrument of high
frequency interface, clockwise to tighten, and confirm the
installation is firm, prevent false contact.
5, connect the power first confirm the emergency stop switch in the
up state, whether it be an emergency stop switch clockwise (in the
direction indicated by the arrow ) rotation to bounce state, the
power supply plug access to good three core power socket, the key
is inserted into and rotated clockwise90 degrees to" ON" status;
this apparatus electric operation.
5. Pictures to show how it works:
Before-after-pictures:
6. Picture show:
7. Our Factory
Nubway Welcome You!
Client Will be the First Forever!
http://www.ipl-laser-beautyequipment.com
Contact Info:
Name: Miss. Kay Ren
Email:Kay@nubwaycompany.net
Office: 86-10-51206522
WhatsApp/Mobile: 0086-13522654626
